User's Manual Part 1

Rev.1.5 Page 13 of 121 D-16-207
VIVIX-S 1417N User Manual
 To make it easy to disconnect the plug at any time, avoid putting any obstacles near the
outlet. Otherwise, it may not be possible to disconnect the plug in an emergency.
 Do not place heavy objects, such as medical equipment on cables and cords. Do not pull,
bend, bundle, or step on the cables and cords to protect their sheath from being
damaged.
 Do not alter the cords. Doing so may damage the cords, which could result in a fire or
electric shock.
 Securely plug the power cord into the AC outlet. If contact failure occurs, or if dust/metal
objects come into contact with the exposed metal prongs of the plug, fire or electric
shock may result.
 Turn OFF the power to each piece of equipment before connecting or disconnecting the
cords. Otherwise, you may get an electric shock that could result in death or serious
injury.
 Hold the plug or connector when you disconnect the cord. If you pull the cord, the core
wire may be damaged, resulting in a fire or electric shock.
 Do not handle the product with wet hands. You may experience an electric shock that
could result in death or serious injury.
1.4.3 Handling
 Never disassemble or modify the equipment. Doing so may result in a fire or electric
shock. The equipment incorporates hazardous parts that may cause an electric shock.
Touching the parts may cause death or serious injury.
 Do not connect the equipment to anything that is not specified in this User Manual.
 Do not place anything on top of the equipment. The object may fall and cause an injury.
If metal objects such as needles or clips fall into the equipment, or if liquid is spilled, it
may result in a fire or electric shock.
 Do not hit or drop the equipment. The equipment may be damaged if it receives a strong
jolt, and it may result in a fire or electric shock.
 Do not place excessive weight on the detector. The internal image sensor may be
damaged, or the image quality may be affected.
 Have the patient take a fixed posture and do not let him or her touch parts unnecessarily.
If the patient touches connectors or switches, it may result in electric shock or malfunction
of the equipment.
 Do not spill liquid or chemicals onto the detector. In cases where the patient is injured,
protect the equipment with a disposable covering not allow to come in contact with
blood or other body fluids. Otherwise, it may result in a fire or electric shock.
 For safety reasons, be sure to turn OFF the power of the equipment when the inspections
indicated in this manual are going to be performed.
 Do not submerge the detector in water.
 Be sure to use the detector on a flat surface so it will not bend. Otherwise, the internal
image sensor may be damaged. Be sure to securely hold the detector while using it in
upright positions.