User's Manual Part 1

Rev.1.5 Page 46 of 121 D-16-207
VIVIX-S 1417N User Manual
3.1.2 Wired Connection

Connect VIVIX-S 1417N detector and SCU with a tether interface cable to make a wired configuration.

As the tether interface cable supplies power to the detector, a battery pack is not needed to be
installed in the detector.
 We recommend you the wired connection method for the following cases.
 When continuous power supply to the detector is needed.
 When the detector is fixed in a bucky stand or on a table.
 When you upgrade the detector firmware or change the inner configural information.
 When you need the data communication to be faster than the wireless connection.
 A battery pack in the detector is kept charging under the wired connection.
 When two batteries are installed in the detector, one battery is fully charged first and
the remaining battery is charged continuously.
 The wireless communication module of the detector maintains its inactivation status
under the wired connection.