User's Manual Part 1

Rev.1.5 Page 48 of 121 D-16-207
VIVIX-S 1417N User Manual
3.3 System Configuration
This section gives information about the configuration modes of VIVIX-S 1417N detector, SCU, workstation
and the generator.
3.3.1 AP Mode (SCU AP Mode)
SCU AP mode is the wireless connection method that connecting the detector with SCU as the center
wirelessly. If the device is connected on AP mode, Wi-fi function is turned on. Wireless function is turned
off if the device is connected on Tether Interface Mode as it is a wired connection mode.
SCU & Detector

The VIVIX-S 1417N detector and SCU are connected wirelessly. In this case, SCU and the detector
operate as AP (Access Point) and STATION respectively.
SCU & PC (Workstation)

SCU and PC (Workstation) are connected with the LAN cable.
 It is available to connect SCU and PC wirelessly. In this case, SCU and the detector
operate as AP (Access Point) and STATION respectively.
SCU & Generator

SCU and the generator can be connected with the generator interface cable.
 It is unnecessary to connect SCU and the generator with a generator interface cable if
you use AED mode of the detector.