User's Manual Part 1

Rev.1.5 Page 71 of 121 D-16-207
VIVIX-S 1417N User Manual
 If you use the wireless communication method, a tether interface cable is not needed as
the image is transmitted wirelessly.
5 To supply power, connect the AC power cable to the AC power input port of SCU.
4.2.2 Connecting SCU mini (FXRS-04A)
1 If you use the DR Trigger interface, connect the one end of generator interface cable to the EXT_INF
port of SCU mini, and the other to the X-ray generator.
 If you use the AED interface, a generator interface cable is not needed as the detector
operates by detecting X-ray automatically.
2 Connect one end of the LAN cable to one of the LAN ports of SCU mini, and the other to the LAN Card
Connector of workstation assigned for data transfer. Stand the antenna of SCU mini upright.
3 To transmit image data using a tether interface, connect the one end of the tether interface cable to the
port of SCU mini and the other to the detector.
 If you use the wireless communication method, a tether interface cable is not needed as
the image is transmitted wirelessly.