Manualshelf

User's Manual Part 2

ManualsBrandsVieworks ManualsElectronicsX-ray Detector
11121314151617181920
Rev.1.5
Page 91 of 121 D-16-207
VIVIX-S 1417N User Manual
5.4 Detector Power Save Function (Sleep)
The battery pack can be comsumed slowly by using the power save function.
The power save function is operated only when the battery supplies power to the
detector. In other words, the power save function cannot be operated if a tether interface
cable supplies power to the detector.
Types of Power Save Mode
Item
Description
Normal
The detector can be operated and take images at any time.
Sleep
The detector cannot be operated. User can take an image by disabling the Sleep mode.
Shut Down
The detector has been turned off. User can take an image after the detector is rebooted.
Setting Items of Power Save Function
Item
Description
Sleep
Sets whether you use the sleep mode function of the detector or not. (On / Off)
Sleep after
If the detector is not used for the specific setting time, it is turned to the sleep mode.
This mode activates only when the sleep mode is set. (10 / 15 / 20 / 25 / 30 min.)
Shut Down
Sets whether you use the shut down function in the detector or not. (On / Off)
Shut Down after
The power of detector is off if it is not used within the setting time. This menu is
activated while the Shut Down function is being used. (30 / 60 / 90 / 120 min.)
Refer to VIVIX Setup Operation Manaul for the detailed information about the power
save mode functions.
Entry Condition of Power Save Mode (Sleep)
Item
Description
Normal
-
Sleep
The detector turns to sleep mode if not used for the setting time (Sleep after).
Shut Down
The detector is turned off if not used for the setting time (Shutdown after) under the
sleep mode. However, if the detector is not operated during the setting time when it is
not in the sleep mode, the detector will be turned off.
Checking Power Save Condition
Item
Description
Normal
All status LEDs are turned on.
Sleep
The Status LED (Green) is blinking.
You can check the Sleep status from VIVIX Setup or VXvue.
VIVIX SDK notices the status of Sleep.
Shut Down
All LEDs are turned off.