User's Manual Part 2

Rev.1.5 Page 80 of 121 D-16-207
VIVIX-S 1417N User Manual
4.4.2 Battery Pack Diagnosis
Check battery remains from the detector
1 Check if a battery pack is attached to the detector.
2 Check remains of a battery from LED display located at the rear of a detector.
Check battery remains from VIVIX Setup
1 Execute VIVIX Setup and go to the Information tab of the Diagnosis dialog.
2 Check remains and voltage of a battery.
 You can also check the battery remains from VXvue or VIVIX SDK.
 Refer to VIVIX Setup Operation Manual for the information about the battery diagnosis.
 Since a battery pack is consumables which performance will be decreased as time passes,
make sure to check its life when you use it. If a battery pack has any problems, consult
service personnel in Vieworks.
Display of Battery Remains
Level
Value
Battery Remains
LED Display
Full
5
81% ~ 100%
Half Quarter
4
61% ~ 80%
Half
3
51% ~ 60%
Quarter
2
31% ~ 50%
Low
1
11% ~ 30%
1% ~ 10%
Unknown
0
 If the battery remains under 30% or is at the 1st level, the system warns low battery and
the detector will be turned off automatically after the battery is consumed for a specific
period of time. Therefore, it is recommended to change the battery when a warning
message or an indicator displays.