User's Manual

Rev.1.0 Page 41 of 109 RA14-14B-011
VIVIX-S 1012N User Manual
3.1.2 Wired Connection

Connect ViVIX-S 1012N detector and VIVIX SCU with a tether interface cable to make a wired
configuration.

As the tether interface cable supplies power to the detector, a battery pack is not needed to be
installed in the detector.
 We recommend you the wired connection method for the following cases.
 When continuous power supply to the detector is needed.
 When the detector is fixed in a bucky stand or on a table.
 When you upgrade the detector firmware or change the inner configural information.
 When you need the data communication to be faster than the wireless connection.
 A battery pack in the detector keeps charging under the wired connection.
 The wireless communication module of the detector maintains inactivation status.