User's Manual

Rev.1.0
3.3
System Configuration
T
his section gives information about
workstation and the
generator.
3.3.1
AP Mode (SCU AP Mode)
SCU AP mode is the wireless
connection
center wirelessly.
VIVIX SCU & Detector

The VIVIX-S 1012N
detector and
detector operate as AP
(Access Point) and
VIVIX SCU & PC (Workstation)

VIVIX SCU
and PC (Workstation) are
 It is
available
detector operate as
VIVIX SCU & Generator

VIVIX SCU and the
generator can be connected with the generator interface cable.

It is unnecessary to connect
cable if
you use AED mode of the detector
Page 43 of 109
VI
VIX
System Configuration
his section gives information about
the configuration modes of VIVIX-S 1012N
detector,
generator.
AP Mode (SCU AP Mode)
connection
method that connecting the detector
with
detector and
VIVIX SCU are connected wirelessly.
In this case,
(Access Point) and
STATION respectively.
VIVIX SCU & PC (Workstation)
and PC (Workstation) are
connected with the LAN cable.
available
to connect VIVIX SCU and PC wirelessly. I
n this case,
detector operate as
AP (Access Point) and STATION respectively
.
generator can be connected with the generator interface cable.
It is unnecessary to connect
VIVIX SCU and the generator with
a
you use AED mode of the detector
.
RA14-14B-011
VIX
-S 1012N User Manual
detector,
VIVIX SCU,
with
VIVIX SCU as the
In this case,
VIVIX SCU and the
n this case,
VIVIX SCU and the
.
generator can be connected with the generator interface cable.
a
generator interface