User's Manual

Rev.1.0
3.3.4 Detector AP Mode
Detector AP mode is the wireless
detector as the center
wirelessly
Detector & PC (Workstation)

The VIVIX-S 1012N
detector
operate as AP
(Access Point) and
 Since
VIVIX SCU
AED
mode without a wired

This mode can be used when mobility and portability are needed.

When configuring
module installed in the PC. The wireless communication performance can be different
depending on the specifications of the wireless module.

If the wireless
VIVIX SCU
can be
Page 46 of 109
VI
VIX
Detector AP mode is the wireless
connection
method that connecting the PC (Workstation)
wirelessly
.
Detector & PC (Workstation)
detector
and PC are connected wirelessly. I
n this case, the detector
(Access Point) and
STATION respectively.
VIVIX SCU
is not used for configuring the detector AP mode, you
mode without a wired
connection. (Cannot use the DR
Trigger
This mode can be used when mobility and portability are needed.
When configuring
the detector AP mode, be sur
e to check the specifications of wireless
module installed in the PC. The wireless communication performance can be different
depending on the specifications of the wireless module.
If the wireless
connection
cannot be made normally because of unexpected p
can be
needed to check the detector condition.
RA14-14B-011
VIX
-S 1012N User Manual
method that connecting the PC (Workstation)
with the
n this case, the detector
and the PC
is not used for configuring the detector AP mode, you
can only use the
Trigger
mode.)
This mode can be used when mobility and portability are needed.
e to check the specifications of wireless
module installed in the PC. The wireless communication performance can be different
cannot be made normally because of unexpected p
roblems,