User's Manual

Rev.1.0 Page 53 of 109 RA14-14B-011
VIVIX-S 1012N User Manual
24 EXT_W- Input Contact - - Returns signal from EXT_W+
25 EXT_X+ Input Contact - - User-defined Pin 2
26 EXT_X- Input Contact - - Returns signal from EXT_X+
27 EXT_Y+ Input Contact - - User-defined Pin 3
28 EXT_Y- Input Contact - - Returns signal from EXT_Y
29 EXT_Z+ Input Contact - - User-defined Pin 4
30 EXT_Z- Input Contact - - Returns signal from EXT_Z+
 Since VIVIX SCU mini has EXT_INF 1 port, only one generator can be connected with.
 Up to three X-ray generators can be connected to EXT_INF1 and EXT_INF2 ports, and
each generator should be connected with a same channel.
 There are Contact type (OPEN/ CLOSE) and TTL type (ON/ OFF) on the signal in/output
pin.
 TTL type information
 ON : VCC
 OFF : GND
 Current: 5 ㎃ ~ 10 ㎃
 Voltage: 12 V ~ 24 V
 When you plan to add interface using a user-defined pin, contact to the person in charge
of Vieworks.