User's Manual

Rev.1.0 Page 85 of 109 RA14-14B-011
VIVIX-S 1012N User Manual
7.4 Product Initialization
If the connection status of system is not stable or setting value is not correct, user can initialize the
products.
7.4.1 SCU Initialization
1 Click Configuration button of SCU after running the VIVIX Setup program.
2 Click Factory Reset button in Configuration dialogue.
3 Wait for SCU to be initialized and rebooted automatically.
4 Check whether SCU initialization is completed.
Default value of SCU initialization
Item Default Value
Network
IP Address
Subnet Mask
Gateway
AP
AP On/Off
Frequency
Country
Band
Channel
SSID
Key
Security
GI (Guard Interval)
Tx Power
Test Mode
On/Off
Period
Trigger
Method
Polarity