User's Manual

Rev.1.0 Page 87 of 109 RA14-14B-011
VIVIX-S 1012N User Manual
7.4.3 Wireless Initialization of Detector
1 Turn off the detector.
2 Press and hold the power button while installing a battery into the battery compartment of the
detector.

Keep pressing the power button.
3 Keep pressing the power button until the orange LED flickers three times. (It will take about 15
seconds.)
4 Initialization will be conducted when orange LED is flickering, after that, the detector will be turned off
automatically.
5 Turn on the detector and check whether detector initialization is completed.
Default value of wireless initialization
Item Default Value
IP Address
Subnet Mask
Gateway
AP ON/OFF
SSID
Key
Wireless Only
 When processing the wireless initialization of a detector, only the detector’s network
information is initialized as a default value.