User's Manual

Rev.1.0 Page 64 of 109 RA14-14B-011
VIVIX-S 1012N User Manual
4.3 Software Installation
This section gives information about how to install the software on the workstation (PC) and how to
configure the environment for software operation and communication.
 Check suitability of acquiring, processing and adjusting of images by referring to the
recommended workstation specifications before the software installation.
4.3.1 Software Classification [TBD]
Vieworks provides clients who purchase our detector system with software as below. You can choose and
use one of our softwares below.
Software Description
VXvue
 A program for acquiring and adjusting images developed by Vieworks.
 Used for ViVIX-S detectors only.
 Unnecessary to develop a separate viewer program.
VIVIX Setup  A program for setting and managing the detector and SCU.
VXvue (Viewer)  Software for acquiring, adjusting and managing the image.
XIPL  Image processing program
Document
 VXvue Operation Manual
 XIPL User Manual
VIVIX SDK
 Software development kit for ViVIX-S detector only, provided by Vieworks.
 You can develop your own software dedicated to ViVIX-S by using this kit.
SDK Package  Development package
VIVIX Setup  A program for acquiring, adjusting and managing the image.
Document  VIVIX SDK Developer Manual
4.3.2 Software Installation

For a client who uses VXvue, install the VXvue program after reading VXvue Operation Manual
carefully.

For a client who uses VIVIX SDK, install the Setup program after reading VIVIX SDK Developer
Manual.
 Be sure to install the software first with reading this manual before configuring Windows
environment.
 Apart from the detector and SCU, the software can be installed separately.