User's Manual

Rev.1.0 Page 66 of 109 RA14-14B-011
VIVIX-S 1012N User Manual
3 Click the chosen network adaptor with the right mouse button and click Properties to display the
Properties window.
Setting Network Adaptor
1 Click Configure button to open the following dialog box, and then go to the Advanced tab.
2 Set Jumbo Packet to the maximum value. (Recommended value: 9014 Bytes)
3 Choose Performance Options in the list of Settings and click Properties button on the right.
4 Choose Flow Control in the list of Settings and select Rx & Tx Enabled on the Value list as shown
below.