Service Manual

Rev.1.0 Page 47 of 90 D-19-616
VIVIX-S VW Service Manual
3.3.4 AP Switching
Using this function, you can conveniently change the external AP when the detector is STATION.

Ex.) If you want to use one detector in both ROOM #1 and ROOM #2.
1 When the detector is in STATION, you can change the external AP by pressing the AP button for about 3
seconds.

That is, the detector changes to the same SSID and key as those of the external AP to be changed.

AP switching disconnects the existing AP and automatically changes to the AP with the largest signal
strength among the list of registered APs. Therefore, the SSID and KEY of the AP to be used must be
registered before switching the AP.
2 During AP switching, the OLED display shows Changing Settings, and you can check the changed
settings after the switching.
 Available only when the detector is in wireless state (without connecting a tether interface
cable).
 Refer to the VIVIX Setup Operation Manual for details on AP switching (e.g. how to
register AP).
 Disponible uniquement lorsque le détecteur est en mode sans fil (sans connecter de câble
d'interface d'attache).
 Reportez-vous au Manuel d'utilisation de VIVIX Setup pour plus d'informations sur la
commutation AP. (par exemple, comment enregistrer AP.)