Service Manual

Rev.1.0 Page 59 of 90 D-19-616
VIVIX-S VW Service Manual
 If you use the AED interface, a generator interface cable is not needed as the detector
operates by detecting X-ray automatically.
 Si vous utilisez l'interface AED, un câble d'interface pour générateur n'est pas nécessaire
car le détecteur fonctionne en détectant automatiquement les rayons X.
2 Connect one end of the LAN cable to one of the LAN ports of SCU mini, and the other to the LAN Card
Connector of workstation assigned for data transfer. Stand the antenna of SCU mini upright.
3 To transmit image data using a tether interface, connect the one end of the tether interface cable to the
port of SCU mini and the other to the detector.
 If you use the wireless communication method, a tether interface cable is not needed as
the image is transmitted wirelessly.
 Si vous utilisez la méthode de communication sans fil, un câble d'interface d'attache n'est
pas nécessaire car l'image est transmise sans fil.
4 To supply power, connect the DC power cable to the DC power input port of SCU mini.
4.1.2 Booting SCU mini (FXRS-04A)
1 Turn on the power switch on the front of the SCU mini. (ON).
2 Make sure the status LED is lit green.