Service Manual

Rev.1.0 Page 75 of 90 D-19-616
VIVIX-S VW Service Manual
5.1.3 Wireless Initialization of Detector
1 Connect the detector wirelessly without connecting the tether interface cable.
2 Press and hold both the power button and AP button over 3 seconds.
3 Initialization will be conducted when the green LED is flickering. After that, the detector will reboot
automatically.
4 When booting is complete, make sure the detector is initialized.
Default value of wireless initialization
Item
Default Value
Network
IP Address
169.254.1.10
Subnet Mask
255.255.0.0
Gateway
169.254.2.100
Wireless Network
SSID
vivix
Key
1234567890
AP Button
AP switching
Wireless Only
OFF
AP
Enable
OFF
Frequency
5㎓
Country
KR
Band
40㎒
Channel
+36
SSID
vivix_ap
Key
1234567890
 When you process wireless initialization of a detector, only the detector’s network
information is reset to the default value.
 Lorsque vous traitez l’initialisation sans fil d’un détecteur, seules les informations réseau
du détecteur sont réinitialisées à la valeur par défaut.