Service Manual

Rev.1.0 Page 76 of 90 D-19-616
VIVIX-S VW Service Manual
5.2 Detector Power Save Function
You can extend the battery life by using the power saving function of the detector.
 This function works only when the battery is supplied power to the system. In other
words, the power saving function does not work when the power is supplied from the
SCU through the tether interface cable or from the AC-DC adapter.
 Cette fonction ne fonctionne que lorsque la batterie est alimentée par le système. En
d'autres termes, la fonction d'économie d'énergie ne fonctionne pas lorsque
l'alimentation est fournie par le SCU via le câble d'interface d'attache ou par l'adaptateur
CA / CC.
Types of Power Save Mode
Item
Description
Normal
The detector can be operated and can take images at any time.
Sleep
The detector cannot be operated. User can take an image by disabling the sleep mode.
Shut Down
The detector has been turned off. User can take an image after the detector is rebooted.
Setting Items of Power Save Function
Item
Description
Sleep
Sets whether you use the sleep mode of the detector or not.
 If the detector is not used for the set time, it switches to Sleep mode if the Sleep function
is set. (Off / After 10min / After 15min / After 20min / After 25min / After 30min)
Shut Down
Sets whether you use the shut down function of the detector or not.
 If the detector is not used during the set time, the detector is turned off. (Off / After
30min / After 60min / After 90min / After 120min)
 Refer to VIVIX Setup Operation Manaul for the detailed information about the power
save mode.
Entry Condition of Power Save Mode
Item
Description
Normal
-
Sleep
The detector turns to sleep mode if not used for the setting time.
Shut Down
The detector is turned off if not used for the setting time under the sleep mode.
If the Sleep function is not used, the detector will shut down if it is not used for a set time.