User guide

E
N
G
L
S
H
ViewSonic A110 9
V. Linear
(Vertical Linearity Center) adjusts the vertical
distortion at the center of the screen image.
NOTE:
Vertical Linearity Center is an advanced control and
should be used for setup and calibration only.
V. Linear Sym
(Vertical Linearity Symmetry) minimizes the
distortion (squeezing or stretching) images between the top
and bottom of the screen image.
NOTE:
Vertical Linearity Symmetry is an advanced control
and should be used for setup and calibration only.
Hourglass s
traightens the slight curves along the top or
bottom of the vertical edges of the screen image.
NOTE:
Use Hourglass and Cupid Bow only if Pincushion
and Pin-Balance do not completely straighten the vertical
edges of the screen image.
Cupid Bow
straightens the slight curves along the vertical
edges of the screen image.
NOTE:
Use Hourglass and Cupid Bow only if Pincushion
and Pin-Balance do not completely straighten the vertical
edges of the screen image.
H Focus
(Horizontal Focus) adjusts the sharpness of the
screen image in the horizontal direction.
V Focus
(Vertical Focus) adjusts the sharpness of the screen
image in the vertical direction.
Tilt
rotates the entire screen image.
Degauss
removes the build-up of magnetic fields that can
cause irregular colors to appear around the edges of screen
images. Your monitor will degauss
automatically
each time
you power it on.
To degauss your monitor
manually,
select Degauss on the
on-screen menu and press button [2].
Important:
Do not degauss repeatedly. Doing so can be
harmful to the monitor. Wait at least 20 minutes before
using this control again.
Control Explanation (Continued)