User guide

E
N
G
L
S
H
ViewSonic A110 5
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the
screen image and minimizing eye strain. The
timing mode
consists of the
resolution
(example 1280 x 1024) and
refresh rate
(or vertical frequency;
example 75 Hz). After setting the timing mode, use the OnView
®
controls
to adjust the screen image.
The recommended timing modes for this monitor are:
VESA 1024 x 768 @ 75 Hz
and
VESA 1600 x 1200 @ 75 Hz.
To set the Timing Mode:
1
Set the resolution: Right-click on the Windows
®
desktop >
Properties
>
Settings
>
Desktop or Screen Area
> set the resolution.
2
Set the refresh rate: See your graphic card's user guide for instructions.
NOTE:
To minimize the adjustments required for an optimal screen
image
,
select a timing mode from the
Preset Timing Modes
table below.
WARNING:
Do NOT set the graphics card in your computer to exceed the
maximum refresh rate for each resolution (see below). Doing so may result in
permanent damage to your monitor.
(NI = Non Interlaced)
Preset Timing Modes
VGA 640 x 400 @ 70 Hz
VGA 640 x 480 @ 60 Hz
VESA
®
640 x 480 @ 75 Hz
VESA 800 x 600 @ 75 Hz
VESA 800 x 600 @ 85 Hz
VESA 1024 x 768 @ 60 Hz
VESA 1024 x 768 @ 75 Hz
VESA 1024 x 768 @ 85 Hz
VESA 1280 x 1024 @ 75 Hz
VESA 1280 x 1024 @ 85 Hz
VESA 1600 x 1200 @ 75 Hz
Macintosh 832 x 624 @ 75 Hz
Macintosh 1152 870 @ 75 Hz
Timing Modes with Maximum Refresh Rates
1600 x 1200 NI @ 77 Hz
1280 x 1024 NI @ 90 Hz
1152 x 870 NI @ 105 Hz
1024 x 768 NI @ 118 Hz
800 600 NI @ 149 Hz
640 x 480 NI @ 180 Hz