A90f+ Color Monitor User Guide Guide de l’utilisateur Guía del usuario Guia do usuário With Plug & Play✘ 19" (18.
Contents Product Registration................................................... 2 For Your Records....................................................... 2 Getting Started Package Contents...................................................... 3 Precautions ................................................................ 3 Quick Installation........................................................ 4 Using the Monitor Setting the Timing Mode ............................................ 5 OSD Lock Settings..
Copyright © ViewSonic Corporation, 2002. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, ViewMeter, and PerfectFlat are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Getting Started Congratulations on your purchase of a ViewSonic® color monitor. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows 95, Windows 98, Windows 2000, Windows Me (Millennium Edition), Windows NT, and Windows XP.
Quick Installation 1 Connect power cord (Continued) Connect the power cord to a properly grounded AC outlet. 2 Connect video cable Make sure both the monitor and computer are turned OFF. Connect the video cable to the computer. Macintosh® users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter. To order a ViewSonic® Macintosh adapter, contact ViewSonic. See “Customer Support” on page 13.
Using the Monitor Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; example 75 Hz). After setting the timing mode, use the OnView® controls to adjust the screen image. For the best picture quality set your monitor timing mode to: VESA 1280 x 1024 @ 75 Hz. To set the Resolution: 1 Right-click on the Windows desktop.
Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OnView® controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 8. Main Menu With OnView controls Front Control Panel Switches between Normal and UltraBrite modes.
Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. 2 To select a control you want to adjust, press the arrow buttons on the front control panel of your monitor and scroll through the choices. When the control you want is highlighted, press button [2]. NOTE: Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness. Display control screen (sample shown in step 3 below). Press button [2] to toggle to the next control in the pair.
Main Menu Controls Adjust the menu items shown below by using the up I and down J buttons. Control Explanation Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness adjusts the background black level of the screen image. H. Size (Horizontal Size) adjusts width of the screen image. H. Position (Horizontal Position) moves the screen image left or right. V. Size (Vertical Size) adjusts the height of the screen image. V.
Control Explanation Trapezoid adjusts the top and bottom of the screen image until they have equal width. Parallelogram slants the vertical edges of the screen image until they are parallel. Rotation rotates the entire screen image. Degauss removes the build-up of magnetic fields that can cause irregular colors to appear around the edges of screen images. There are two ways to degauss the display: automatically by turning the monitor on, or manually by selecting the DEGAUSS control from the menu.
Control Explanation Memory Recall returns adjustments to the original factory settings if the display is operating in a factory preset timing mode listed in this user guide. Exception: This control does not affect changes made with the User Color control. ViewMeter® displays information regarding the current input signal coming from the graphics card of the computer.
Other Information Specifications CRT Type Phosphor Glass surface Full 19” (18.0” viewable diagonal area), 0.21 mm Horizontal, 0.14 mm Vertical, and 0.25 mm diagonal dot pitch, 90° deflection RGB P22 medium/short persistence TM = 52.6%, anti-static, anti-reflection Input Signal Video Sync RGB Analog (0.
Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the back of the monitor and to a power outlet. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • Make sure the video cable supplied with the monitor is tightly secured to the video output port on the back of the computer.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Region Web site T = Telephone Email F = FAX United States viewsonic.com/ support T: (800) 688-6688 F: (909) 468-1202 Canada viewsonic.com/ support T: (800) 688-6688 F: (909) 468-1202 service.us@ viewsonic.com service.ca@ viewsonic.com United Kingdom viewsoniceurope.com T: 0800 833 648 F: (01293) 643910 service.eu@ viewsoniceurope.
Cleaning the Monitor • MAKE SURE THE MONITOR IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1 2 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1 2 Use a soft, dry cloth.
Limited Warranty VIEWSONIC CRT MONITORS What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Appendix Safety Guidelines CAUTION: The socket-outlet should be installed near the equipment and be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country.
Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ViewSonic Corporation
