User Guide

32
Get-Function description:
Length: Total Byte of Message excluding ɆCRɇ.
TV/DS ID ,GHQWL¿FDWLRQIRUHDFKRI79'6aGHIDXOWLV
Command Type Identify command type,
Ɇgɇ (0x67h) : Get Command
Ɇrɇ (0x72h) : Valid command Reply
Ɇ-Ɇ (0x2Dh) : Invalid command Reply
Command: Function command code: One byte ASCII code.
Value[1~3]: 7KUHHE\WHV$6&,,WKDWGH¿QHVWKHYDOXH
CR 0x0D
Get-Function format
Send: (Command Type=ɇgɇ)
Name Length ID
Command
Type
Command Value1 Value2 Value3 CR
Byte Count 1 Byte 2 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte
Bytes order 1 2~3 4 5 6 7 8 9
NOTE: ɆPower STBY statusɇ is the exception for VT2405LED-1 and VT3205LED.
Reply: (Command Type=ɇrɇ or Ɇ-ɇ)
If the Command is valid, Command Type =”r”
Name Length ID
Command
Type
Command Value1 Value2 Value3 CR
Byte Count 1 Byte 2 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte
Bytes order 1 2~3 4 5 6 7 8 9
NOTE: The reply for ɆPower STBY statusɇ command is the exception for VT2405LED-1 and V3205LED.
ItɅs 0x36 72 6C 30 30 30 0D ( 6rl000<CR>).
If the Command is Not valid, Command Type=”-“
Name Length ID
Command
Type
CR
Byte Count 1 Byte 2 Byte 1 Byte 1 Byte
Bytes order 1 2~3 4 5
Example1: Get Brightness from TV-05 and this comm and is valid. The Brightness value is 67.
Send (Hex Format)
Name Length ID
Command
Type
Command Value1 Value2 Value3 CR
Hex
0x38
0x30
0x35
0x67 0x62 0x30 0x30 0x30 0x0D
Reply (Hex Format)
Name Length ID
Command
Type
Command Value1 Value2 Value3 CR
Hex
0x38
0x30
0x35
0x72 0x62 0x30 0x36 0x37 0x0D