User Guide

47
Example2: Set Brightness as 176 for TV-02 and this command is NOT valid Send (Hex Format)
Name Length ID
Command
Type
Command Value1 Value2 Value3 CR
Hex
0x38
0x30
0x32
0x73 0x24 0x31 0x37 0x36 0x0D
Reply (Hex Format)
Name Length ID
Command
Type
CR
Hex
0x34
0x30
0x32
0x2D 0x0D
Set function table:
Basic function
Set Function Length ID Command Command Value Range Comments
Type (ASCII) Code (ASCII) Code (Hex) (Three ASCII bytes)
Power on/off
(standby)
8 s ! 21 000: STBY
001: ON
Input Select 8 s “ 22 000: TV
001: AV
002: S-Video
003: YPbPr
004: HDMI1
014: HDMI2
024: HDMI3
034: HDMI4
005: DVI
006: VGA1
016: VGA2
026: VGA3
007: Slot-in PC
(OPS/SDM)/HDBT
008: Internal memory
009: DP
00A:
Embedded/Main
(Android)
1. No need for USB
2. For the case of two more
same sources, the 2
nd
digital is used to indicate
the extension.
3. The HEX of 00A is 30
30 41.
Brightness 8 s $ 24 000 ~ 100
Power lock 8 s 4 34
000: Unlock
001: Lock
*See note in details
Volume 8 s 5 35
000 ~ 100
900: Volume
down(-1)
901:Volume up(+1)
Mute 8 s 6 36
000: OFF
001: ON (mute)
Button lock 8 s 8 38
000: Unlock
001: Lock
*See note in details
Menu lock 8 s > 3E
000: Unlock
001: Lock
*See note in details
Remote Control 8 s B 42
000: Disable
001: Enable
002: Pass through
Disable: RCU will be no
function
Enabled: RCU controls
normally
Pass through: Display will
bypass the RC code to
connected device via the
RS232 port, but not react
itself.