User Guide

10
3. 设定显示器
警告：为了您和装置的安全，在外部装置准备好之前，请勿连接电源。
3.1 连接外部 PC
5
Remote Control Overview
Connection Diagram
Schematic diagram for connecting the product to a PC.
(Note: Disconnect the power plug before installing or removing the product!)
6
7
Switch between normal operation and standby
SNAP Take screenshot
Enable or disable sound
NUMERIC KEYS Input any number
FERRZE Enable or disable freeze function in the system
HOME
Display the main launcher
MENU Display the on screen menu
CURSOR KEYS
Select or adjust menu options
VOL +/- Adjust volume
Return to the previous setting interface
INPUT Display the input source selection menu
BRI +/- Adjust brightness
S.MODE Select the sound mode
SLEEP
Set the sleep time and auto standby when the
specified time is reached
ASPECT Switch the aspect ratio on the screen
P.MODE Select the picture mode
Confirm the operationOK
For operation of multimedia functions in
the intelligent platform
INFO
Display the content information of the
input source
Serial port cable
PC
RS232
Audio Cable
VGA Cable
Computer
RS232 Connections
When you use an RS232 serial port cable to connect your display to an external
computer, certain functions can be controlled by the PC, including power on/off, volume
adjustment and more.
Remark: The connection diagram in this Manual is only for reference when
connecting a PC box, which is subject to actual operations.
1. 请按照以下说明显示外部 PC 的视讯和声音。
注意：外部 PC 也可透过 HDMI 线接到显示器。
• 将 VGA 线（15-pin）从外部 PC 接到显示器上的 VGA 输入埠。
• 将音源线从外部 PC 上的音讯输出端口接到显示器上的音讯输入端口。
注意：为取得最佳效果，计算机输入分辨率请选择 1920x1080p。