User Guide

3. Press Select App to show the APK list.

4. Select Enplug Display and press Save.

5. Enplug Display APK name will show on Select

App.

6. Exit admin mode and press custom input

source. Enplug Display will run on screen.

4.7. Setting (Admin mode)

Press Menu 1 9 9 8 on remote control to enter

admin mode.

4.7.1. Wi-Fi

Via Enable/Disable to control Wi-Fi On/Off. After

Enable, the screen will list all available WiFi AP.

Note: Ethernet will be disable automatically if WiFi

turn on and connect to network.

4.7.2. Ethernet

Enable: To turn Ethernet On.

Disable: To turn Ethernet Off

Enable Ethernet will show Connection Type and

Mac Address.

1. Connection Type: Available type is DHCP/Static IP

A. DHCP

B. Static IP

C. IP Address

D. Netmask

E. DNS Address

F. Gateway Address

2. Mack Address

Note: WiFi will be disable automatically if Etherne

turn on and connect to network.