Video Wall Installation Guide

RS232 daisy-chain connection

1. Make sure the ID number has been set for each display.

2. Connect the computer to a display using a RS-232C serial null modem cable.

3. Connect all displays using the RS-232C serial null modem cables.

4. Go to Setting > Control Setting each display. Select RS-232C.

5. Refer to the RS-232 protocol document.

2.5mm to 2.5mm cable

RS232 to 2.5mm cable

2.5mm to 2.5mm cable

LAN connection

1. Connect the computer to a LAN switch or hub using a RJ45 cable.

2. Connect all displays separately to the same LAN switch or hub just connected

with your computer using RJ45 cables . Now the computer and all displays are

within the same local area network.

3. Make sure the network connection is enabled.

4. Go to Setting > Control Setting each display. Select LAN. Refer to the user

manual of the purchased model for the detailed settings and the operation of LAN

control.

2.5mm to 2.5mm cable

RS232 to 2.5mm cable

2.5mm to 2.5mm cable