Installation guide

8. Other OSD Setting

Frame Comp.

Choose to turn the frame compensation function on or off. If turned on, the display

will adjust the image to compensate for the width of the display bezels in order to

accurately display the image.

Eco Mode

Set the Eco mode to Normal if you need to power ON/OFF via LAN control.

APM

Set the APM to OFF if you don’t need automatic turn-o󰀨 display when no signal after

a while.

Switch On State

Choose the display status used for the next time you connect the power cord.

• Set to ON the display will turn on when the power cord is connected to a wall

outlet.

• Set to STANDBY the display will remain Standby when the power cord is

connected to a wall outlet.

• Set to LAST STATUS the display will return to the previous power status (on/off/

standby) when removing and replacing the power cord.