ViewSonic ® DP701W4 Digital Photo Frame - File Management Reference Guide Model No.
DP701W4 File Management Reference Guide Jan 10, 2008 Version 0.2 Table of Contents 1. 2. 3. 4. 5. 6. 7. Copy, Single File ...................................................................................................................................2 Copy, All Files .......................................................................................................................................4 Delete, Single File .................................................................................
1. Copy, Single File Home Menu 1-1. From the top control panel, press the Home Menu button . Use the ↑ and ↓ on the top control panel to select “Photo” menu option. Press “OK” to confirm selection. Fig. 1-1 Home Menu Input Source Menu 1-2. Use the ↑ and ↓ on the top control panel to select input source (Internal memory, CF Card, SD/MMC Card, Memory Stick, xD Card or USB.). Press “OK” to confirm selection. Fig.
File Management Menu 1-5 Use the ↑ and ↓ on the top control panel to select “Copy To” mode. Press “OK” to confirm selection. 1-5 File Management Menu Use the ↑ and ↓ on the top control panel to select destination target (Internal Memory, CF Card, SD/MMC Card, Memory Stick or xD Card.). Press “OK” to confirm selection. Message of “1 photo copying” will be displayed during the copying process. Message of “1 photo copied” will be displayed when the process is completed.
2. Copy, All Files 2-1 Repeat steps 1-1 to 1-4. Use the ↑ and ↓ on the top control panel to select “Copy all to” mode. Press “OK” to confirm selection. Use the ↑ and ↓ on the top control panel to select destination target (Internal Memory, CF Card, SD/MMC Card, Memory Stick Fig. 2-2 File Management Menu or xD Card.). Press “OK” to confirm selection. Message of “Are you sure to copy all photos to {Destination Device}?” will pop up. Use ← and → to select between “Yes” or “No”.
3. Delete, Single File 3-1 Repeat steps 1-1 to 1-4. Use the ↑ and ↓ on the top control panel to select “Delete” mode. Press “OK” to confirm selection. Message of “Are you sure to delete?” will pop up. Use ← and → to select between “Yes” or Fig. 3-1 File Management Menu “No”. Select “Yes” to proceed the deleting. Press “OK” to confirm selection. Message of “1 photo deleted” will be displayed when the process is completed. The screen will return to Thumbnail Menu. 4.
The screen will return to Home Menu. 5. USB, Connected to PC Installation When mini-USB connector is connected to a PC, the PC will serve as a host device and DP701WF will serve as an external storage device to the PC (like a card reader). From DP701WF’s Side 5-1 Message of “Connected; Will return to normal operation after disconnection” will pop up. Fig. 5-1 USB is connected to PC From PC’s Side The PC setup is same as a standard USB storage device.
5-3 Select “Install the software automatically (Recommended)”. Click “Next >” to continue. Fig. 5-3 Windows New Hardware Wizard, Screen 2 5-4 Searching for device driver. This process will take a few minutes. Fig. 5-4 Windows New Hardware Wizard, Screen 3 5-5 Click “Continue Anyway” when hardware installation warning screen pops up. Note: There is no risk to you selecting the CONTINUE ANYWAY button illustrated in Figure 5-5 as our products are thoroughly tested prior to sale.
5-6 Installing driver. This process will take a few minutes. Fig. 5-6 Driver Installation 5-7 Driver installation is completed. Click on “Finish” to conclude the installation. Fig.
6. USB, Connected to PC Operation Once DP701W4 is recognized by PC, it is treated as a card reader. All of memory devices attached to DP701W4 will be viewed as a removal drive to PC. The drive assignment will vary depending on number of existing drive in user’s PC. File management operation will follow standard Windows process. Example of viewing DP701W4’s internal memory from a PC: 6-1 Select “Open folder to view files” to access DP701W4’s internal memory. Click “Ok” to continue.
7. USB, Connected to OTG (On The Go) Device When DP701W4 is connected to another OTG compatible device (Such as a Sony Cyber-shot digital camera.), it acts like a USB host device. The external OTG device will be viewed an USB storage device. If the external USB device is OTG compatible, DP701W4 will automatically detect it. No driver installation is required. The usage operation is identical to other storage media (Internal memory, CF Card, SD/MMC Card, Memory Stick or xD Card).
