E655 Color Monitor User’s Guide Guide de l’utilisateur (Latin American Spanish) (Brazilian Portuguese)
Copyright© ViewSonic® Corporation, 1998. All right reserved. Power Macintosh is a registered trademark of Apple Computer, Inc. Windows is a registered trademark of Microsoft Corporation. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA). VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA.
Power Cord Safety Guidelines (continued) AC PLUG CORD PRECAUTIIONS FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET. If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CONTENTS Getting Started Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 E N G L I S H Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Quick Installation* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation Front Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Main Menu . .
Getting Started Congratulations on your purchase of a ViewSonic E655 color monitor. Important! Save the original box and all packing material for future shipping needs. NOTE: This product was designed for operation in the magnetic fields of the hemisphere where it was purchased. Also, the word "Windows®" in this user guide refers to the following Microsoft® operating systems: Windows '95, Windows '98, Windows NT (5.0).
Quick Installation 1 Write the serial number on the back of the monitor in the space provided on page 1 labeled "For your records" and register your monitor's warranty on the Internet at: http//:www.viewsonic.com." 2 Read the Precautions section thoroughly (page 5) before installing the monitor. Make sure the computer and the monitor are both turned off before connecting any cables. 3a PC users: Attach the video cable to the computer.
Operation This section shows how to adjust your monitor for your personal preference. Front Control Panel With your monitor turned on, follow the numbered steps in sequence as shown below. ➊ Press button [1] for the main menu shown below. ➎ Press button [1] to save changes & exit the screen. ➋ Press the [▼] or [▲] arrow to highlight the control you want to adjust. ➍ Press the [▼] or [▲] arrow to make adjustments.
To exit a screen and save changes, press button [1]. Main Menu, Part 1 CONTRAST/BRIGHTNESS: With CONTRAST/BRIGHTNESS highlighted on the menu, press button [2] again to toggle between BRIGHTNESS and CONTRAST. CONTRAST adjusts the foreground white level of the screen image. [▲] increases the contrast of the image. [▼] decreases the contrast of the image. E N G L I S H Shortcut: You can also display the CONTRAST control screen by pressing either [▲] or [▼] before displaying the Main Menu.
To exit a screen and save changes, press button [1]. V. SIZE/POSITION: With V.SIZE/POSITION highlighted on the menu, press button [2] again to toggle between VERTICAL SIZE and VERTICAL POSITION. VERTICAL SIZE adjusts the height of the screen image. [▲] increases the screen height. [▼] decreases the screen height. E N G L I S H VERTICAL POSITION moves the screen image up and down. [▲] moves the screen up. [▼] moves the screen down. PINCUSHION straightens the vertical sides of the screen image.
To exit a screen and save changes, press button [1]. Main Menu, Part 2 ® ® E N G L I S H VIEWMETER® screen by ViewSonic® displays the current horizontal and vertical synchronization signal (refresh rate) coming from your computer. To adjust these values, see the graphic's card user's guide for your computer. VIEWMATCH® COLOR provides three color control options including two preset color temperatures. Press button [2] to select a color temperature or USER.
Other Information Specifications CRT Type 15" (13.8"/35.0cm viewable diagonal) 0.
Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the back of the monitor and to a power outlet. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power on but no screen image • Make sure the video cable supplied with the monitor is tightly secured to the video output port on the back of the computer.
Cleaning the Monitor • MAKE SURE THE MONITOR IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. E N G L I S H To clean the case 1 Use a soft, dry cloth.
LIMITED WARRANTY VIEWSONIC E655 MONITORS What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
For ViewSonic® Customer Support: U.S. and Canada only 1-800-688-6688 From outside U.S. and Canada 909-869-7976 From Europe +44 (1293) 643-900 From Asian/Pacific Rim countries 886 (2) 2248-4072 Technical Support Questions vstech@viewsonic.com Product or Dealer Questions prodinfo@viewsonic.com World Wide Web http://www.viewsonic.
