User Guide

Quick Installation

1. Connect video cable

• Make sure both the LCD display and computer are turned OFF.

• Remove rear panel covers if necessary.

• Connect the video cable from the LCD display to the computer.

2. Connect power cord (and AC/DC adapter if required)

100-240 Vac

50/60 Hz

Power Adapter

Supplier: Channel Well Technology Co., Ltd

Model: KPL-040F-VI

*1: HDMI Out

*2: HDBT Out

HDBT: is transmitted over category 5e cables

or above up to 100 m (328 ft) long, with 8P8C

modular connectors of the type commonly used

for Ethernet local area network connections.

Magnetic adsorption Passive Touch Pen

3. Turn ON LCD display and computer

Turn ON the LCD display, then turn ON the computer. This sequence (LCD

display before computer) is important.

NOTE: Windows users may receive a message asking them to install the INF file.

To access the file, please use the directory ":\CD\vsfiles".

4. Windows users: Set the timing mode (example: 1024 x 768)

For instructions on changing the resolution and refresh rate, see the graphics

card’s user guide.

5. Installation is complete. Enjoy your new ViewSonic LCD display.

Additional Software Installation (Optional)

"Issue a 1 year myViewBoard Personal Subscription Coupon"

1. Please visit https://myviewboard.com and sign up an account.

2. Sign in and “Enter a Coupon” in the menu.

3. Fill in the S/N of IFP2710 and your account will be upgraded from Basic to

Personal.