User Guide

Control of the Touch Function

1. Before using the touch function, make sure the USB cable is connected and the

Windows operating system is started.

NOTE:

1. The touch function may need about 5 seconds to resume if the USB cable is re-

plugged or the computer resumes from sleep mode.

2. The touchscreen can only detect up to 10 fingers simultaneously.

3. Cursor does not accurately follow your finger when you touch the screen, please

follow the steps below to recover.

(OS: Windows 7, Windows 8, Windows 8.1 and Windows 10 Calibration)

1. Open Control Panel, open Hardware and Sound, and then open Tablet PC Settings

2. Select Calibration

3. Follow the instructions to recalibrate your screen

Tilt angle adjustment

1. Tilt angle adjustment (-5˚ to 90˚)

2. Swivel angle adjustment(L/R 177.5˚)