User Guide
Table Of Contents
- Información de conformidad
- Información del Copyright
- 1. Procedimientos iniciales
- 2. Pizarra inteligente y características de la pantalla LCD
- 3. Configurar la pantalla
- 4. Funcionamiento básico de ViewBoard
- 5. Aplicación y configuración incorporada de ViewBoard
- 6. Solución de problemas
- 7. Cuidado y mantenimiento
- 8. Modos de visualización
- 9. Especificaciones
- 10. RS-232 Protocol
78
POWER Lock 1. Lock “POWER” key on the front and RCU.
2. The SET_POWER on/off should be workable via RS232, but
does not mean the POWER lock will be released under this
case.
3. Can not be unlocked by reset in OSD setting
4. Will auto AC power-on in power-lock
5. Under power-lock, the set will not enter power saving when
no PC signal and neither not turn off when no other video
signals after 15min.
Remote control
disable
Lock the RCU keys, but keep the front panel buttons workable.
2. Wake-on-LAN by MAC address as alternative for SET Power on
Length= 126 Bytes
6 Bytes 6 Bytes (#1) 6 Bytes (#2) … 6 Bytes (#16) 24 Bytes
0xFF FF ... FF MAC address MAC address … MAC address 0x00 00 … 00