Service manual

2. Specification
Test Resolution & Frequency 1600x1200 @ 60Hz
Test Image Size Full Size
Contrast and Brightness Controls
Factory Default:
Contrast = 70%, Brightness = 100%
VIDEO INTERFACE
Input Connector (refer the appendix A) D-Sub = DB-15 (Analog)
DVI-A = DVI-I (Analog)
DVI-D = DVI-I (Digital)
Default Input Connector Defaults to the first detected input
Video Cable Strain Relief
Equal to twice the weight of the monitor for
five minutes
Video Cable Connector DB-15 Pin out Compliant DDC/CI
Video RGB (Analog)
Separate Sync / Composite Sync / SOG
Video Signals
TMDS (Digital)
Video Impedance 75 Ohms (Analog), 100 Ohms (Digital)
Maximum PC Video Signal 950 mV with no damage to monitor
Maximum Mac Video Signal 1250 mV with no damage to monitor
Sync Signals TTL
DDC/CI Compliant with Revision 1.0
Sync Compatibility Separate Sync / Composite Sync / SOG
Video Compatibility
Shall be compatible with all PC type
computers, Macintosh computers, and after
market video cards
Resolution Compatibility
640 x 350, 640 x 400, 640 x 480, 720 x 400,
720 x 480, 720 x 576, 800 x 600, 832 x 624,
1024 x 768, 1152 x 864, 1152 x 870, 1280 x
720, 1280 x 768, 1280 x 960, 1280 x 1024,
1360 x 768, 1400 x 1050, 1440 x 900, 1600 x
1200, 1680 x 1050, 1920 x 1080, 1920 x 1200
Exclusions Not compatible with interlaced video
Viewsonic Corporation 4 Confidential - Do Not Copy VP2130b-1