ViewSonic ® N1630w LCD TV - User Guide - Guide de l’utilisateur - Guía del usuario IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.
Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: [ ] N1630w ViewSonic LCD TV [ ] VS12114-1M N1630w-1M_UG_ENG Rev.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm ENGLISH NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col.
Caution Please use the following ViewSonic TVs only with the following wall-mount kit. ViewSonic TV Model No. ViewSonic Wall-Mount kit model WMK-10 Use with other Wall-Mount kit may cause instability and possibly result in injury. To find the perfect mount for N1630w, please browse www.viewsonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775. Contact ViewSonic service team at: http://www.ViewSonic.
ENGLISH Contents Copyright Information................................................................................... 1 Warning and Notification .............................................................................. 2 Important Safety Instructions ...................................................................... 3 Compliance Information ............................................................................... 8 Declaration of RoHS Compliance ...........................................
Copyright Information Copyright © ViewSonic Corporation, 2008. All rights reserved. ® ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR partner, ViewSonic Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
WARNING ENGLISH Do not expose this TV to rain or moisture. It may increase the risk to fire or electronic shock. Dangerous Voltage: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons.
Important Safety Instructions USE Keep the following guidelines to protect the AC power cord from being damaged. If the AV power cord is damaged, it may result in a fire or an electric shock. Stop using it and ask your dealer or ViewSonic service center to exchange it. ◊ Do not place the TV where the power cord is subject to wear or abuse. ◊ Do not pinch, bend, or twist the cord excessively. The core lines may be bared and cut, causing a short-circuit, and resulting in a fire or an electric shock.
When not in use Antenna grounding according to the National Electrical Code, ANS/NFPA 70 ENGLISH If you will not be using the TV set for long periods of time, the TV set should be disconnected from the AC power outlet to prevent power line surges. The TV set is not disconnected from the AC power source when the TV set is switched off. To disconnect the TV set completely, unplug from the AC power outlet.
VENTILATION This TV contains a strong magnet in the speaker unit that generates a magnetic field. Keep any items susceptible to magnetic fields away from the speaker. Slots and openings in TV are provided for ventilation. To ensure reliable operation of the TV and to protect it from overheating, be sure these openings are not blocked or covered. The TV may accumulate dust and get dirty if proper ventilation is not provided.
Do not install the TV in places subject to extreme temperature, such as in direct sunlight, near a radiator, or heating vent. If the TV is exposed to extreme temperature, the TV may overheat and cause deformation of the enclosure or cause malfunction. Do not install the TV in a place exposed to direct air conditioning. If the TV is installed in such a location, moisture may condense inside and may cause a malfunction. ◊ Do not place the TV in hot, oily, humid or excessively dusty places.
VOLUME ADJUSTMENT Broken pieces LCD SCREEN Handling of broken glass and liquid crystal leakage If the LCD panel gets damaged, crystalline liquid leakage may occur, or scattered broken glass may result. Do not touch broken glass or crystalline liquid which is toxic, with bare hands as cuts, poisoning or skin irritation may occur. Also do not glass fragments or leaked crystalline liquid get into your eyes or mouth.
ENGLISH Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.1% < 0.1% 0.01% < 0.01% 0.
Getting Started List of Features ENGLISH 1. Brilliant HDTV. Vibrant PC monitor. One innovative display. 2. Stylish design ideal for kitchen, home office, and RV. 3. Enjoy HDTV with 1366x768 native image resolution. 4. PC input for computer applications and web surfing. 5. 6 inputs including HDMI/DVI for the latest HD devices. Package Contents Please make sure the following items are included with your LCD TV. If any items are missing, please contact your dealer.
Getting Started Installing the LCD TV ENGLISH Disconnecting the Stand 1. Place the TV face down on a soft cloth or cushion on a table. 2. Remove the base. It is attached to the stand with 4 screws. 3. Remove the 4 screws holding the stand to the hinge. 4. Remove the stand. Installing the Stand 1. Place the TV face down on a soft cloth or cushion on a table. 2. Connect the stand with the hinge at the back of TV with 4 screws. 3. Attach the base to the stand with 4 screws.
Getting Started ENGLISH Mounting ViewSonic LCD TV to the wall The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the wall, please consider the following guidelines: • Read the Important Safety Instructions, at the start of this manual. • Do not install in a moist or wet environment. This equipment is intended for indoor use. • Do not install near heat source, or strong magnetic fields.
Getting Started Wall Mount Kit Specifications (VESA) When attaching to other building materials, please contact your nearesr dealer. ENGLISH A C B D Product Family LCD TV inch VESA Spec.
Getting Started ENGLISH Front View of the Product Item Description 1 Power ON/OFF button Turn the power on from standby mode or turn the power off to return to the standby mode. 2 Power LED Indicator Lights up in blue when the TV is turned on. Lights up in orange when the TV is in standby mode. 3 Remote Control Receiver Receives IR signals from the remote control. 4 Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu.
Getting Started ENGLISH Rear View of the Product Item Description 1 Power (AC input) Plug-in the supplied AC Power cord and connect to the AC input power source. 2 HDMI Input Terminal Connect this port to the HDMI/HDMI-DVI jack of the compatible equipment. 3 VGA signal input Connect a 15-pin D-sub RGB cable to the RGB output of your computer and the other end to the RGB input on the rear of the LCD TV. 4 YPbPr signal input Connect this jack to the YPbPr output of A/V device.
ENGLISH Getting Started Item Description 11 PC Audio input Connect the RGB Audio Out on your computer to the RGB Audio on the rear of the LCD TV. AV connection Connect the composite video and audio input jacks to the corresponding output jacks of your A/V device. --- VIDEO: Composite Video input [5] --- AUDIO: AV/ S-Video signal Audio input [9] S-Video connection Connect the S-Video and audio input jacks to the corresponding output jacks of your VCR or other video device that has S-Video.
Getting Started Connecting the LCD TV The F connector is supplied for an artistic reason: to hide the Cable or VHF/ UHF antenna from being seen from the front. Connect one end of the F connector to the TV input jack, and connect the other end with the Cable or VHF/UHF antenna. Cable System or VHF/UHF Antenna System Enjoy the high-definition and standard-definition digital programming along with standarddefinition analog programming.
Getting Started HD Cable Box/HD Satellite Box ENGLISH You can also enjoy high-definition programming by subscribing to a high-definition cable service or a high-definition satellite service. For the optimum picture quality, be sure to connect this device to your TV via the HDMI or component video (with audio) input on the back of your LCD TV.
Getting Started YPbPr or Component Connection Side of TV HD cable box/ HD satellite box ENGLISH Rear of TV Audio cable Component video cable CATV/Satellite antenna cable Contact ViewSonic service team at: http://www.ViewSonic.
Getting Started Personal Computer Use the LCD TV as the monitor of your computer. The picture below shows the connection for PC. The LCD TV can also be connected to PC with DVI or HDMI output. Side of TV ENGLISH Rear of TV Connect to an HDMI compatible PC with the HDMI cable VGA 15 Pin cable Audio cable (stereo mini plugs) ☼ • Connect the PC IN jack to the PC using a 15-pin cable and audio cable.
Getting Started Other Equipment DVD Player/ VCD Player/ Game system DVD Player/ VCD Player/ Game system DVD Player/ VCD Player/ Game system DVD Player/ Personal Personal Computer Computer Blu-ray Disc Player/ PS3 Digital cable box Personal Computer Headphone Digital satellite receiver DVD Player Audio system ☼ • Please refer to the Quick Start Guide (supplied) when connecting the other equipment to your LCD TV. Contact ViewSonic service team at: http://www.ViewSonic.
Using the TV Features Remote Control and TV Controls Inserting Remote Control Batteries ENGLISH 1. Remove the battery cover by pulling then lifting the knob on the cover. 2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3. Reattach the battery cover. CAUTION • Only use the specified AA batteries. • Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk of fire or lead to personal injury.
Button Description 2 ENTER Press to confirm the selection in the OSD menu, or to enter the OSD menu you select. Press ENTER after you input channel numbers will change channels immediately. 3 TV Press to direct to TV source when in any other source. 4 - VOL + Press to adjust the volume. 5 GUIDE Press to display the Electronic Program Guide (EPG). It contains the program information for the channel you’re watching. ＊The picture here shows an example of the GUIDE screen in a DTV source.
ENGLISH Using the TV Features Button Description 10 MENU Press to turn the OSD (On-Screen Display) menu on. 11 ▼ CH ▲ Press to change the channels up or down. 12 ZOOM Press this button repeatedly to select the screen size. You can select from Full, 4:3,Movie Scale, and Zoom In. ＊The digital TV HD signal is available in Full and 4:3. 13 FAV Press this button to show Favorite List and select your favorite channels that have already been stored.
Using the TV Features Operation ENGLISH Turning the TV On and Off Press the POWER button on the remote control. You can also use the Power button on the front of the panel. Changing Channels 1. Using Channel Buttons Press ▼CH▲ button to change channels, and the TV changes channels in sequence. You will see all channels that have been memorized. Channels erased or not memorized will not be shown. 2. Using Number Buttons (1) ATV The “-” button has no function in ATV mode.
ENGLISH Using the TV Features Storing Channels into Memory 1. Press the MENU button to display the OSD main menu. 2. Press ◄ or ► to select the “CHANNEL” menu. Press ▲ or ▼ to select “TV Source”, and use ◄ or ► to select the antenna connection to “Air” or “Cable”. Air: RF signal programs by “Air”. Cable: RF signal programs by “Cable”. 3. Press ▲ or ▼ to select “Auto Scan”, then press ► to enter. 4.
Using the TV Features ENGLISH Selecting the Input Source To select the TV or other external input sources connected to the TV. 1. Press the INPUT button on the remote control. 2. Press ▲ or ▼ to select the required input source between TV, AV, S-Video, YPbPr, HDMI, or PC. 3. To confirm the selection, press ENTER. Favorite Channel Setting To set your favorite channel into memory: 1. Press the MENU button to display the OSD main menu. 2. Press ◄ or ► to select the “CHANNEL” menu.
ENGLISH Using the TV Features Adding/Erasing Channel When the channel is erased, it will not appear on the screen when you browse the channels with ▼CH▲ button. To see the channel again, you must add the channel or perform the “Auto Scan” (page 26) function again. 1. Press the MENU button to display the OSD main menu. 2. Press ◄ or ► to select the “TV” menu. Press ▲ or ▼ to select “Show/Hide”, then press ► button to enter “Show/Hide” setting. 3.
Using the TV Features ENGLISH Adjusting the Settings 1. (1) Press the MENU button to display the OSD main menu. (2) Press ◄ or ► to select your desired top Menu. (3) Press ▲ or ▼ to select the control of “Contrast”, “Brightness”, “Sharpness”, “Tint”, “Color”, then press ◄ or ► to adjust the level. (4) Press MENU to exit. 2. (1) Press the MENU button to display the OSD main menu. (2) Press ◄ or ► to select your desired top Menu.
ENGLISH Using the TV Features Setting up Time menu 1. Press the MENU button to display the OSD main menu. 2. Press ◄ or ► to select the “TIME” menu. 3. Press ▲ or ▼ to select “Sleep Timer”, and press ◄ or ► to set the “Sleep Timer” from 5~240 min, or Off. 4. Press ▲ or ▼ to select “Time Zone”, and select the correct time zone of your area with ◄ or ►. The displayed time of “Clock” will be changed at the same time automatically. To adjust “Clock”, select “Clock” and press ►.
Using the TV Features ENGLISH For detailed Close Caption setting: 1. Press ▲ or ▼ to select “Option”, then press ► to enter “Option” setting. 2. Press ◄ or ► to select the Mode to be “Custom”, and then use ▲ or ▼ to select desired options and use ◄ or ► to adjust detailed settings. ＊When you select the Mode to be “Default”, you can not adjust the detailed settings. Using the Parent Controls 1. Press the MENU button to display the OSD main menu. 2. Press ◄ or ► to select the “LOCK” menu. 3.
Using the TV Features ENGLISH US: Press ► to set TV or MPAA ratings. (1) TV 1. Press ▲ or ▼ to select “TV”, then press ► to enter “TV” rating system setting.
Using the TV Features Canada: Press ► to set Canadian English and French ratings. (1) Canadian English 1. Press ▲ or ▼ to select “Canada Eng”. 2. Press ► to enter. 3. Press ▲ or ▼ to select your desired Canadian English rating level. ENGLISH The Canadian English rating levels are defined as following: C (children) C8+ (children eight years and older) G (general programming, suitable for all audiences) PG (parental guidance) 14+ (viewers and older) 18+ (adult programming) EXEMPT (exempt) 4.
Using the TV Features ENGLISH To Block Unrated Movie or TV Programs 1. Press ▲ or ▼ to select “Unrated Lock”, then press ◄ or ► to select “On” or “Off”. When “On” is selected, all programs that are not rated will be blocked. 2. Press MENU to exit. To Set Rating Region Table RRT Setting defines the rating standard for a particular geographic region and/ or country. 1. Press ▲ or ▼ to select “RRT Setting”, then press ► to enter RRT setting. 2.
Using the TV Features ENGLISH To block by Input Source 1. Press ▲ or ▼ to select “Input Block”. 2. Press ▲ or ▼ to select the input source, then ◄ or ► to select from “Block” or “UnBlock”. 3. Press MENU to exit. To Restore Factory Setting 1. Press the MENU button to display the OSD main menu. 2. Press ▲ or ▼ to select the “OPTION” menu. 3. Press ENTER or ► to enter “OPTION” menu. 4. Press ▲ or ▼ to select “Restore Default”, then press ► to restore the factory default setting. 5.
ENGLISH Using the TV Features Using PC Function 1. When in PC source, press the MENU button to display the OSD main menu. 2. Press ◄ or ► to select the “PICTURE” menu. 3. Press ▲ or ▼ to select your desired controls, and press ◄ or ► to adjust. 4. For advanced PC functions, select “Advanced” (only in PC source) and press ► to enter. 5. Press ▲ or ▼ to select “Auto” (Auto adjustment), “H-Pos” (H-Position), “V-Pos” (V-Position), “Clock” or “Phase”, and adjust the level with ◄ or ►.
Other Information Cleaning the LCD TV To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
Other Information Troubleshooting ENGLISH Please contact ViewSonic service team directly if you have questions, service needs, or require technical assistance related on the use of your television. Contact ViewSonic Service Team at: http://www.ViewSonic.com Or call our service team: United States 1-800-688-6688 Canada 1-866-463-4775 Problem Possible Solution No power • Make sure the power cord is properly connected to the LCD TV AC power socket.
Problem Possible Solution Remote control unit does not operate • Make sure the directions of batteries are inserted correctly referring to the user guide. • Batteries could be weak or dead. Replace with new batteries. • Is a fluorescent light illuminated near the remote control sensor? • The path of the remote control beam may be blocked. Make sure the path is clear and that the remote control is aimed at the remote control sensor on the TV.
Other Information Specifications Model ENGLISH LCD Input signal N1630w Type 16” TFT Active Matrix RGB 0.252 (H) x 0.252 (V) mm pixel Color Filter Glass surface RGB vertical stripe Anti-Glare RGB RGB analog (0.7/1.
Other Information Limited Warranty VIEWSONIC® LCD TV How long the warranty is effective: ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser. What the warranty does not cover: 1. Any product on which the serial number has been defaced, modified or removed. 2. Damage, deterioration or malfunction resulting from: a.
Other Information Mexico Limited Warranty VIEWSONIC® LCD TV ENGLISH What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
ViewSonic ®
