User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
6
Device control and functions
Projector
6
1
2
4
3
5
7
5
5
5
6
1
2
4
3
8
7
9
8
9
LS625W LS625X
1.
Turn the projector power on or off.
2. (Power LED indicator)
Please refer to “LED indicator message”.
3. (TEMP LED indicator)
Please refer to “LED indicator message”.
4. (LAMP LED indicator)
Please refer to “LED indicator message”.
5. / / / (Keystone button)
Manually corrects distorted images resulting from an angled projection.
Left/
Right/
Up/
Down (Navigation button)
Selects the required menu item to make adjustments.
6. ENTER
Enter the selected on-screen display (OSD) menu item.
SOURCE
A source selection bar displays.
7. MENU/EXIT
MENU: Displays or exits the on-screen display menu.
EXIT: Returns the previous OSD menu, exits and saves the menu settings.
8.
/
Left/
Right (direction buttons): Selects the required menu item to make
adjustments.
: Adjusts the projector’s sound level.
9.
/
Up/
Down (direction buttons): Selects the required menu item to make
adjustments.
/ (Keystone button): Manually corrects distorted images resulting from an angled
projection.