User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
47
Main menu Sub-menu Options
5.
Advanced
Light source
setting
Light Source Mode
Normal/Power Saving/
Custom
Light Source Hours
Light Source Power
DCR On/Off
Closed Caption Off/CC1/CC2/CC3/CC4
Reset settings Reset/Cancel
6.
System
Language Multi-language OSD option
Projector
Position
Front Table/Rear Table/Rear
Ceiling/Front Ceiling
Menu Settings
Menu Display Time
5 sec/10 sec/15 sec/20 sec/25
sec/30 sec
Menu Position
Center/Top-Left/Top-Right/
Bottom-Left/Bottom-Right
High Altitude
Mode
On/Off
Quick Auto
Search
On/Off
Security
Settings
Change Password
Input Current Password/Input
New Password
Power On Lock On/Off
Panel Key Lock On/Off
Remote control
code
1/2/3/4/5/6/7/8
RS232 Baud
Rate
2400/4800/9600/14400/19200/
38400/57600/115200
12V Trigger On/Off
7.
Information
• Source
• Color Mode
• Resolution
• Color System
• IP Address
• MAC Address
• Firmware
Version
• 3X Fast Input
Note: 1. Due to the update, it does not conform to the above content, without notice.