User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
49
Function Description
2. Image menu
Advanced
Color
See “Adjusting Color” for details.
Tint
See “Adjusting Tint” for details.
Sharpness
See “Adjusting Sharpness” for details.
Gamma
See “Selecting a Color Temperature” for details.
Brilliant Color
See “Adjusting Brilliant Color” for details.
Noise Reduction
See “Reducing image noise” for details.
Color Management
See “Color Management” for details.
Reset color settings Returns all color settings to the factory preset values.
3. Power Management menu
Auto Power On
Signal
Set whether or not to automatically turn on when the
projector is in the standby mode or the VGA or HDMI
signal of 5V power is detected.
CEC
See “Using the CEC function” for details.
Direct Power On
Selecting On allows the projector to turn on
automatically once the power is fed through the power
cord.
Smart Energy
Auto Power Off
See “Setting Auto Power Off” for details.
Sleep Timer
See “Setting the Sleep Timer” for details.
Power Saving
See “Set power saving” for details.
Standby Settings See “Standby settings” for details.