User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
8
17.
Enter
Enter the selected screen to display
(OSD) menu item.
18.
Exit
Return to the previous OSD menu to
exit and save the menu settings.
19. Pattern
Shows the inbuilt testing screens.
20.
Blank
Hide screen image.
21. (Zoom out)
The displayed zoom lever can be used
to zoom out the projected image
22. (Volume+)
Increase the volume.
23. (Zoom in)
The displayed zoom lever can be used
to zoom in on the projected image
24.
Color Mode
Select Color Mode.
25.
(Volume)
Decrease the volume.