User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
20
5. Press Menu and then press the
remote control / to select the
Display and press to select Aspect
Ratio.
6. Press Menu and then press the
remote control / to select Image
and press to select Color Mode.
7. Press Menu and then press the
remote control / to select Power
Management and press to select
Auto Power On.
8. Press Menu and then press the
remote control / to select Basic
and press to select Audio Settings.
9. Press Menu and then press the
remote control / to select
Advanced and press to select 3D
Settings.
10. Press Menu and then press the
remote control / to select System
and press to select Language.