User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
29
Optimizing the image
Selecting a picture mode
The projector is preset with several predened picture modes. You may choose one of
these modes that best ts your operating environment and input signal picture type.
To select an operation mode that suits your need, please follow the steps described
below.
●Press [Color Mode] repeatedly until you arrive at the mode you desire.
●Enter Image > Color mode menu and press / to select the required mode.
Picture modes for different types of signals
The following lists the Picture modes that can be used for different signal types.
1. Standard mode: Suitable for normal conditions during the daytime.
2. Game: Tint suitable for gaming.
3. Movie Mode: Applicable for playing colored movies, video clips from digital cameras,
or DVs from a PC input in darker (dim) environments to achieve the best viewing
effects.
4. Brightest: Maximizes the brightness of the projected image. This mode is suitable
when using projectors in environments such as well-lit rooms where extra-high
brightness is required.
5. Sports mode: Tint suitable for watching sporting events.
6. User1/User2: Users can adjust the color according to their preferences.
Switch to Movie Mode will trigger notch lter glass and bring slight operating sound.