User Guide

42
iii. You can adjust the wired local area network.
iv. After setup has nished, the remote network operation access to the projector is
protected with a password.
v. After setup has nished, access to the Tools page is protected with a password.
To avoid mistakes, please input the English letters and digits in the Tools page.
After adjustment, press the Send button and the data will be saved in the projector.
vi. Press Exit and then you can return to the remote network operation page.
Please note the input length limits in the following table (including space and other
punctuation marks):
Type item Input length Maximum character
Crestron Control IP Address 16
IP ID 4
Port 5
Projector Projector Name 32
Location 32
Assigned To 32
Network Conguration DHCP (Enabled) (None)
IP Address 16
Subnet Mask 16
Default Gateway 16
DNS Server 16
User Password Enabled (None)
New Password 26
Conrm 26
Admin Password Enabled (None)
New Password 26
Conrm 26
3. The Info page displays the information and status of this projector.
Press Exit and then you
can return to the remote
network operation page.