User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
45
Menu operations
Menu system
Please note that the on-screen display (OSD) menu may vary according to the type of
signal received.
The projector must detect at least one valid signal in order to use the menu items. If no
device has been connected to the projector or if no signal has been detected, only a few
menu items will be accessible.
Main menu Sub-menu Options
1.
Display
Aspect Ratio Auto/4:3/16:9/16:10/Native
Keystone
Up/Down: -40~40
Left/Right: -40~40
Corner Adj.
Position
Horizontal: -5~5
Vertical: -5~5
Phase 0~31
H. Size -15~15
Digital Zoom 0.8X~2.0X
OverScan Off/1/2/3/4/5
3X Fast Input Yes/No
2.
Image
Color mode
Brightest, Standard, Movie,
Sports, Gaming, User 1/User 2
Brightness 0~100
Contrast -50~50
Color
Temperature
5500K
Red gain/Green gain/Blue
gain/Red offset/Green offset/
Blue offset
6500K
8000K
Advanced
Color -50~50
Tint -50~50
Sharpness 0~31
Gamma
1.8/2.0/2.2/2.35/2.5/Cubic/
sRGB
Brilliant Color Off/1/2/3/4/5/6/7/8/9/10
Noise Reduction 0~31
Color Management
Primary
color
Red/Green/Blue/
Cyan/Magenta/
Yellow
Tint -99~99
Saturation 0~199
Gain 5~195
Reset color
settings
Reset/Cancel