User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
51
Function Description
6. System menu
Language
Sets the language for the On-Screen Display (OSD)
menus. See “Using the menus” for details.
Projector Position See “Choosing a location” for details.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after
your last key press. The range is from 5 to 30 seconds
in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
High Altitude Mode
A mode for operation in high altitude areas. See
“Operations at high altitudes” for details.
Quick Auto Search See “Switching input signal” for details.
Security Settings See “Using the password function” for details.
Panel Key Lock See “Locking control keys” for details.
Remote control code See “Remote control code” for details.
RS232 Baud Rate See “RS232 command table” for details.
7. Information menu
Current System Status
Source
Shows the current signal source.
Color mode
Shows the selected mode in the Image menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows the input system format.
IP Address
Displays the IP address of the projector.
MAC Address
Displays the MAC address of the projector.
Firmware Version
3X Fast Input