Manualshelf

User Guide

ManualsBrandsViewSonic ManualsProjectors1920 x 1080 Resolution, 5,000 ANSI Lumens, 1.2-1.9 Throw Ratio
71727374757677787980
69
Setting Power Saving
The projector lowers the power consumption if no input source is detected after 5 minutes to
prevent unnecessary waste of light source life. You can further decide if you would like the
projector to turn off automatically after a set period of time.
1. Open the OSD menu and go to the POWER MANAGEMENT > Smart Energy
menu.
2. Press Enter and the Smart Energy page is displayed.
3. Highlight Power Saving and press / .
4. When Enable is selected, the projector light source will be changed to Eco mode after
no signal is detected for 5 minutes.