User Guide
Table Of Contents
2626
Adjusng the Projected Image
Adjusng the Projector's Height and Projecon Angle
The projector is equipped with one (1) Smart Stand. Adjusng the stand will change
the projector’s height and the vercal projecon angle. Carefully adjust the stand to
ne tune the projected image’s posion.
NOTE:
• If the projector is not placed on a at surface or the screen and the
projector are not perpendicular to each other, the projected image can
become trapezoidal. However, the “Auto Vercal Keystone” funcon will
correct the issue automacally.
Adjusng the Focus
To adjust the focus of the on-screen image, slowly move the focus ring upwards or
downwards.