User Guide
Table Of Contents
- Introduction
- Shipping contents
- Controls and functions
- Setting up
- Positioning your projector
- Using the menus
- Adjusting your projector’s settings
- Connect the projector to your device
- Different menu options
- M1+ FW Upgrade
- Wallpaper
- Image Settings
- About the aspect ratio
- Auto Keystone
- V Keystone
- Brightness
- Contrast
- Harman Kardon - Adjusting the audio settings
- Muting the Sound
- Adjusting the Sound level
- Adjusting the Audio Mode
- Adjusting the Light source settings
- Reset All Settings
- Eye Protection
- Viewing different file
- Using the 3D function
- OSD Menu System
- Specification sheet
- HDMI Support Video Timing
- HDMI Support PC Timing
- 3D Support Timing
- USB-C Support Timing
24
Optimizing the image
Select the Display Mode
The projector is preset with several predened picture modes so that you can choose one
to suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following
steps.
Go to Settings > Display Mode
Press up / down to select a desired mode.
Press OK when nished.
Display Mode
Mode
Brightest
Maximizes the brightness of the projected image.
This mode is suitable for environments where high
brightness is required, such as using the projector in
well lit rooms.
Standard
Displays images in standard levels of contrast,
brightness, and sharpness.
Theater Optimizes the image for movie.
Harman Kardon - Adjusting the audio settings
The sound adjustments made as below will have an eect on the projector speaker.
Muting the Sound
Go to Settings > Harman Kardon > MUTE
Press < / > to adjust ON / OFF.
Press OK when nished.
If available, you can press on the remote control to toggle the projector audio between on
and o.
Adjusting the Sound level
Go to Settings > Harman Kardon > Audio Volume
Press < / > to adjust volume, volume can be adjusted from 0 to 20.
Press OK when nished.
If available, you can press or on the remote control to adjust the projector’s sound level.