ViewSonic ® N2011 LCD TV - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell’utente - Gebruikshandleiding - Användarhandbok - Käyttöopas - Руководство пользователя - ViewSonic ® Model No.
Compliance Information ................................................................................. 1 Important Safety Instructions .......................................................................... 2 Copyright Information ...................................................................................... 3 Product Registration ........................................................................................ 3 Antenna Installation Instructions .........................................
ENGLISH Compliance Information CE Conformity for European Countries CE Conformity The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” User Information for all Countries Notice: Use the cables which are included with the unit or specified.
Important Safety Instructions Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7.
Copyright Information Copyright © ViewSonic Corporation, 2006. All rights reserved. ENGLISH ® ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
1.
ENGLISH Getting Started Congratulations on your purchase of a ViewSonic® LCD TV. Important! Save the original box and all packing material for future shipping needs.
ENGLISH Front View of the Product 1 2 3 4 5 6 7 8 9 1 Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. 2 Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. 3 MENU Turn OSD menu ON/OFF. 4 CH Down Channel down when source is at TV or select a control while in OSD menu. 5 CH Up Channel up when source is at TV or select a control while in OSD menu. 6 ENTER To highlight a control in OSD menu.
ENGLISH Rear View of the Product E F G H I A C D B A Power Input (AC Input) Connect to LCD TV and AC outlet with the power cord. B Cable Manager C YPbPr Signal Video Input Connect the external video devices with component output to these jack. D AV Signal Video Input Connect the external video device such as VCR, DVD and video game into this jack. E RF Antenna / Cable TV Input Connect to the antenna or cable service.
ENGLISH Remote Control ViewSonic 8 N2011
ENGLISH Remote control button function as follow A INPUT Input source select (for main screen) B TV Switch to TV when in any source C VOL +/– Adjust volume up or down D 0~9 number Switch channel number buttons E LAST Return to previous channel F RED Move the cursor (It is active in Name and Teletex function) GREEN YELLOW BLUE G POWER In Teletext function: move cursor up In Name function: add desired channels In Teletext function: change from current page to selected page In Name function: eras
STORE button • Store current page in List mode. • Press the LIST button to change from FLOF system to LIST Mode. • Press a coloured button corresponding to the coloured brackets on the screen for page number storage. • Enter the Teletext page number using the 0 ~ 9 digit buttons (enter three digits). • Press the STORE button to memorize the page numbers you require. INDEX button • Press the Index button to return back to index page. When you press this button in teletext mode, a CURSOR appears.
ENGLISH Installation 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION • Only use the specified AA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. • Insert batteries according to (+) and (-) markings.
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately). Audio in Cable (not supplied) Stereo system 4. Connecting to DVD/ Set Top Box Connect Video/ Audio cables from compatible devices into the back panel of LCD TV. 1) With RCA A/V cable: Video Cable (not supplied) VCR or DVD Player 2) With S-Video cable: S-Video Cable (not supplied) Audio in Cable (not supplied) VCR or DVD Player ViewSonic 12 N2011 ENGLISH 3.
3) With YPbPr cable: ENGLISH YPbPr Cable (not supplied) Audio in Cable (not supplied) VCR or DVD Player 4) With SCART cable: SCART Cable VCR or DVD Player 5. Connecting with the power cord Connect the power cord to the power cord connector on the back of your LCD TV, and plug the other end of the power cord into a correctly grounded electrical outlet.
6. Turn Power ON ENGLISH Press the Power button on the top of the LCD TV, or press the Power On (red) button on the Remote Control. Turn Video source power ON. 7. Select input source for your LCD TV, via either OSD menu or Remote control The Enter key of N2011 is the shortcut key for selection of input source to display.
ENGLISH Basic Operation To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Turning the LCD TV Before using the LCD TV: 1. Connect external equipments properly. 2. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LCD TV on/off: Press POWER button on the top of the cabinet or press POWER button on your remote control to turn on/off the TV.
OSD Functions ENGLISH Picture Menu It is active in all input sources. Contrast: To adjust contrast of video. Brightness: To adjust luminance of video. Colour: To adjust colour. Tint: To adjust tint level. Sharpness: To adjust picture sharpness. Colour Temp: To select colour Temperature by pressing ◄► — Normal, Warm, or Cool. Picture Mode: To select picture mode by pressing ◄► — User, Standard, Movie, or Game.
ENGLISH Bass: To adjust the bass. Treble: To adjust the treble. Balance: To adjust the left and right audio balance. AVC: To select automatic volume control circuitry (AVC) ON or OFF. MTS: To select the audio language. Note: The MTS function is active only when the input source is TV. TV-Channel Menu It is only active in TV source. Auto Scan: To automatically preset the channels into TV’s memory by pressing ◄►. Kindly suggest you auto scan all the channels before watching your TV for the first time.
ENGLISH If you want to exchange channel 1 with channel 2: 1. Move your cursor to “From” and press ◄► to select channel 1. 2. Move your cursor to “To”, and press ◄► to select channel 2. 3. Move your cursor to “Store”, and confirm the instruction with ENTER. 4. Press MENU to exit. Channel Copy: To copy the channel. The setting procedure is the same as Channel Exchange. Fine Tune: To adjust the frequency of channels in order to reduce the noise in picture.
ENGLISH Function Menu When input source is TV, YPbPr, S-Video or AV: When input source is SCART: Sleep Timer: To set TV sleep timer between 15 min, 30 min, 45 min, 60 min, or OFF. Source Select: To select input source between TV, SCART, YPbPr, S-Video and AV with ◄►. CANAL+: To enable SCART connector to support CANAL+ Set Top Box (available in French). For normal SCART function, please select OFF. Note: The CANAL+ function is available only when the input source is SCART.
Other Information LCD Type Color Filter Glass surface Panel tilt Input signal 20.1” TFT Active Matrix 0.6375 (H) x 0.6375 (V) mm pixel pitch RGB vertical stripe Anti-Glare UP: +15° , Down: 0° RF Video Audio TV system Antenna/ PAL 1 composite RCA, 1 S-Video, 1 YPbPr component, 1 SCART 1 RCA (L/R) stereo Speaker Output 5W x 2 Audio Output 1 RCA (L/R) stereo jack Power Voltage 100-240 VAC, 50/60 Hz (auto switch) Display area Full Scan 408 mm (H) x 306 mm (V) 16.1” (H) x 12.
ENGLISH Troubleshooting No power • Make sure the LCD TV is properly connected. • Make sure the AC power cord is properly connected. • Make sure the AC power is ON, DC power button is ON (Green LED). • Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Poor or no picture • The TV station may be experiencing problems. Try another channel. • The Cable TV signal may be scrambled or encoded. Please contact your local cable operator.
Cusomer Support For technical support or product service, see the table below or contact your reseller. Country/Region Web Site Telephone Austria www.viewsoniceurope.com/aus 0150 159 6005 Belgium www.viewsoniceurope.com/befl www.viewsoniceurope.com/befr 02 256 6642 Denmark www.viewsoniceurope.com/dk 35 25 65 12 Finland www.viewsoniceurope.com/fi 09 2311 3413 France www.viewsoniceurope.com/fr 03 8717 1616 Germany www.viewsoniceurope.com/de 0696 630 8051 Republic of Ireland www.
Limited Warranty ENGLISH VIEWSONIC® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
ViewSonic ®
