ViewSonic ® N2060w LCD TV - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell’utente - Användarhandbok - Käyttöopas - Руководство пользователя - ﺪﻠﻴﻞ اﻠ ﻤﺴ ﺘ ﺨ ﺪﻢ Model No.
CONTENTS Compliance information ------------------------------------------------1 Important Safety Instructions ----------------------------------------- 2 Copyright Information -------------------------------------------------- 3 Product Registration ---------------------------------------------------- 3 Antenna Installation Instructions------------------------------------- 4 Clean the LCD display-------------------------------------------------- 4 GETTING START Package Contents----------------------------
ViewSonic 1 N2060w
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7.
Copyright Information Copyright © ViewSonic Corporation, 2006. All rights reserved. ® ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Antenna Installation Instructions 1.
GETTING STARTED Congratulations on your purchase of a ViewSonic LCD TV display. Important !Save the original box and all packaging material for future shipping needs.
Front View of the Product Power Key : Press to turn on or off the TV. MENU Key : Press to show the OSD menu and exit OSD menu at the TV. Down / Up Key:Press to select function and channel. - / + Key: Press to confirm your function selection and adjustment. Source Key : Press to select your input source. SCART Rear View of the Product HDTV Y Pb/Cb Pr/Cr HDTV Audio Input AV Audio Input AV S-video \ There is a wide range of video and audio equipment that can be connected to your TV.
PREPARATION Assembly Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take your precautions not to damage the screen. Take out TV and base from carton, assembled by three pieces screws, which you could find from the accessory box.
HOW TO CONNECT SCART connector Audio and Video CINCH sockets (AV IN) (AV) To connect a VCR, a camcorder, a DVD player or a satellite receiver. S-Video socket and Audio CINCH sockets (AV IN) (S-VIDEO) To connect an S-Video VCR or an S-Video camcorder. Connect the three separate component video cables to the DVD player’s. Y, Pb and Pr ports and to the Y, Pb and Pr ports on the TV. Connect the audio cables to the DVD player’s AUDIO L and R ports and to the L and R AUDIO AV ports on the TV.
HEADPHONE 1. 2. When headphones are connected, the sound of TV set will be cut. The VOL keys are used to adjust the volume level. key on the remote control to switch off the sound from the Press the headphone. Note: When a TV channel or external AV source is blocked because of a rating set via the Parental control menu, also the headphone is muted. PC connection How to connect PC input .Connect a D-sub cable to D-sub port which is located at bottom of TV as Graph. .
HDMI SOCKET (High-Definition Multimedia Interface) (LOCATED AT THE BACK OF THE TV SET, NEAR THE POWER INPUT SOCKET) This socket allows the connection to all appliances fitted with an HDMI socket. The standard HDMI allows a digital transmisson of video and audio data using only one connector. It gives you the possibility to obtain very high quality images. In this case it is necessary to use an HDMI connecting cable. Make sure the appliance output is set to be HDMI output.
REMOTE CONTROL USE OF THE REMOTE CONTROL POWER: DISPLAY Press to turn on/off the TV. The TV is never completely powered off unless it is physically unplugged. Press this key to display: (1) the channel number when watching a TV programme. (2) the input source when watching an AV programme. CH Press or (or MENU ▲ or ▼ button) buttons to scroll through the channels. MUTE Temporarily interrupt the sound or restore it. VOL Press + or – (or MENU or button) to increase or decrease the volume.
TELETEXT Teletext is an information service organized like a magazine, which is provided by some TV stations in addition to regular television broadcasting. TELETEXT Press TELETEXT. The Teletext screen appears. To turn off the Teletext mode, press TELETEXT again. MIX Press MIX to superimpose the teletext over a normal broadcast picture. Press again to return to Teletext mode. SIZE Press SIZE repeatedly to display the upper teletext part, the lower teletext part and then to return to the normal.
Remote Control Batteries Installlation Follow the steps below to insert the batteries. 1.Open the remote control’s rear battery compartment cover . 2.Insert two AAA (1.5v) batteries. Ensure that the positive and negative ends match as indicated on the bottom of the battery compartment. 3.Replace the battery compartment cover .
Preparation of beginning to watch TV 1. Place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 2.
Audio Adjustments Display the Main menu by pressing MENU button. Select the Sound menu using the button. Press the OK button to confirm. Use the / buttons to select each option. Balance : adjust the balance between left/right channels as required using the / buttons. Bass : adjust the bass level as required using the Treble: adjust the treble level as required using the / buttons. / buttons. SRS : Using / , activate (On) or deactivate (Off) SRS function.
PIP/POP adjustments Press the MENU button to display the Main menu Select the PIP/POP menu using the Àbutton. Press the OK button to confirm. Use the ¿ / À buttons to select each option. Dual mode : Using ½ / ¾ buttons activate (PIP/POP) or deactivate (Off) the PIP/POP function. Following options are available if you have selected PIP or POP at the PIP line. Position : use the ½ / ¾ buttons to change the position of the PIP frame on the screen.
Channels search Channels search involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified on this page. Display the Main menu by pressing MENU button. Select the TV set up menu using the button. Press the OK button to confirm. Use the / buttons to select each option. Auto Search Select Auto Search using the button.
Manual set-up Select Manual search using the button. Press the OK button to display the Manual search menu. Use the / buttons to select each option. Prog. number: Allows to select the programme on which you want save a new channel or a programme you want to modify. Using the / buttons, select the programme. Frequency : Allows to enter a specific frequency for tuning. Using the button, select the Frequency option and press the OK button. Using the 0~9 digit and OK button.
Store prog.: Allows to Save a channel on a new programme No. or to Insert a channel on an already existing programme No. (the channel previously saved on this programme No. will be shifted to the uper programme n..). - Once a channel has been found and named, use the button to select the Store prog. option. - Using the / buttons, select Save or Insert and press the OK button to confirm. System: Allows to change the audio norm. - Using the button, select the System option.
INPUT SELECTION To select AV source: To select desire input source, press the AV button to display the selection menu. Use the / buttons to select each input sources. Press the OK button to display the desire input source. To select input source in PIP/POP mode To select desired input source in PIP/POP mode, press the AV button to display the selection menu. Use the / buttons to select either MP source (to modify Main picture source) or PIP source (to modify PIP source).
Display the Main menu by pressing MENU button. Select the Set up menu using the button. Press the OK button to confirm Use the / buttons to select each option. OSD language : To select the language for the menus. OSD timeout : To set an automatic shut-off time for Menu. Using select 5 > 10 > 20 > 30 > 40 > 50 seconds. / buttons OSD background : Select Opaque or Transparent type. Sleep Timer : To set an automatic shut-off time. Using / buttons select Off > 15 > 30 > 45 > 60 > 90 > 120 minutes.
PC MODE In PC mode, main menu is dfferent from the one in TV mode. Please select PC as main input. PC SETTINGS Display the Main menu by pressing MENU button. Select the PC menu using the button. Press the OK button to confirm. Use the / buttons to select each option. H. position : use the screen. V. position : use the / / buttons to move the picture horizontally on the buttons to move the picture vertically on the screen. Focus : Adjust as required to improve the picture quality.
APPENDIX TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug from the mains before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners.
Product Specification DUCT Feature 20”Wide screen Wide Viewing Angle (176° H / 176° V ) Items Specification LCD Panel TV Function Video Inputs PC mode Audio Output ViewSonic Screen Size Aspect Ratio Resolution 20” TFT-LCD Panel 16:9 1366 x 768 (WXGA) TV Tuning System PAL B/G,D/K,I and SECAM L/L’(Multi-Europe) Sound System Nicam/a2 SCART (RGB+CVBS) x1,CVBS x1 RCA S-Video Component HDMI Analog RCA(Composite) x 1 S-Video x 1 YPbPr x 1 Audio L/R x 1 (Share) Audio L/R x 1 D-sub(15pin) Speaker
OSD language Table Stand English,French,German,Italian,Dutch,Spanish, Swedish,Russia Included Wall Mount dimenstion VESA 100 x 100 mm Power Supply AC100V~240V, 50/60Hz Power Consumption <70W Dimenstion W x H x D (with stand) 522 x 424 x 185mm Weight (net) Lb/Kg (w/o Accessories) 7Kg Regulations CE, SASO, GOST Accessories Remote Controller, Batteries (x2), AC Power Cord, User’s Manual,quick start guide , VGA cable, PC audio cable.
For VGA Support timing table (D-Sub/HDMI) CEA Timing 720x400@70hz(VGA,IBM) For HDMI-DVI (HDMI) 480p/60Hz 4:3 640x480@60hz(VGA,IBM) 640X480@67hz(MAC II ) 480p/60Hz 16:9 720p/60Hz 16:9 640x480@72hz(VESA) 1080i/60Hz 16:9 640x480@75hz(VESA) 480i/60Hz 4:3 800x600@60hz(VESA) 800x600@72hz(VESA) 480i/60Hz 16:9 579p/50Hz 4:3 800x600@75hz(VESA) 832x624@75hz(MAC II ) 579p/50Hz 16:9 720p/50Hz 16:9 1024x768@60hz(VESA) 1080i/50Hz 16:9 1024x768@70hz(VESA) 576i/50Hz 4:3 1024x768@75hz(VESA) 1152x864@ 75H
Troubleshooting No power • Make sure the LCD TV is properly connected. • Make sure the AC power cord is properly connected. • Make sure the AC power is ON, DC power button is ON (Green LED). • Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Poor or no picture • The TV station may be experiencing problems. Try another channel. • The Cable TV signal may be scrambled or encoded. Please contact your local cable operator.
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site Telephone Austria www.viewsoniceurope.com/aus 0150 159 6005 Belgium www.viewsoniceurope.com/befl www.viewsoniceurope.com/befr 02 256 6642 Denmark www.viewsoniceurope.com/dk 35 25 65 12 Finland www.viewsoniceurope.com/fi 09 2311 3413 France www.viewsoniceurope.com/fr 03 8717 1616 Germany www.viewsoniceurope.
Limited Warranty VIEWSONIC® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.