Compliance Information.............................................................................................1 Important Safety Instructions .....................................................................................2 Copyright Information ................................................................................................3 Product Registration ..................................................................................................3 Antenna Installation Instructions....
ENGLISH Compliance Information CE Conformity for European Countries CE Conformity The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to ϘElectromagnetic compatibilityϙ and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to ϘSafety.ϙ User Information for all Countries Notice: Use the cables which are included with the unit or specified.
ENGLISH Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 8.
ENGLISH Copyright Information Copyright © ViewSonic® Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
ENGLISH Antenna Installation Instructions 1.
ENGLISH Getting Started Congratulations on your purchase of a ViewSonic® LCD TV. Important!Save the original box and all packing material for future shipping needs.
ENGLISH Setting the LCD TV on the wall Hanging the LCD TV on the wall requires special skill that only be performed by qualified service personnel. Please contact ViewSonic or your local distributor for the installation instruction. Hanging the LCD TV on the wall requires special skill that only be performed by qualified service personnel. Please contact ViewSonic or your local distributor for the installation instruction and service.
ENGLISH Move loudspeaker secure It please arrange with ViewSonic or your local distributor to move it except the loudspeaker. Please carry out and operate following: 1. Cut off the power to join. 2. Face LCD TV below on the towel or the woolen blanket. 3. Disassemble 9 screws in the base. 4. Move except that the base. 5. Disassemble 4 screws of the back loudspeaker. 6. Exert oneself downward, remove the loudspeaker.
A ENGLISH Side View of the Product Input Select the Input source. Confirm OSD menu selection. B Volume Up Increase volume or adjust a highlighted increasingly control while in OSD menu. C Volume Down Decrease volume or adjust a highlighted control decreasingly while in OSD menu. D CH Up Channel up/ Scroll up. E CH Down Channel down/ Scroll down. F MENU Turn OSD menu ON/OFF. G Power Turn the power ON/OFF.
ENGLISH Rear View of the Product 9 ViewSonic N2600w
ENGLISH A TV signal input Connect to the antenna or cable service. B YCbCr signal Audio input (left/right) Connect the external audio into this jack. C YCbCr signal input Connect the external video device with component output to these jacks. D AV/ S-Video signal Audio input (left/right) Connect the external audio into this jack. E AV Video input Connect the external video devices such as VCR, DVD and video game into this jack.
ENGLISH Remote Control 1 14 2 3 15 4 16 5 17 18 19 6 7 8 9 20 21 22 23 10 24 11 2 12 13 2 Remote control button function as follow 1 SOURCE Select Input Source. 2 0~9 Input channel number. 3 Recall Return to the previous channel. 4 VolumeŸ / Volumeź Adjust Volume. 5 SRS Enable/Disable Surround Sound. 6 MUTE Mute On/Off. 7 TELETEXT Function Key (Green) Select the teletext pages color coded in green along the bottom of the screen. 8 TELETEXT Switch Teletext On/Off.
SLEEP Set timer to turn off TV. 12 PIP/POP Activate PIP or POP feature. 13 PIP/SOUR Press to toggle the Sub picture between PIP and POP. 14 POWER Power ON/OFF. 15 -/— Use this button to select the channel number with “-/—”. 16 Channel Ÿ / Channelź Change TV channels. 17 NICAM Select the sound mode. Ÿ/ź for OSD function select and Ż/Ź for function adjust. VOLŸ and VOLź button can adjust the volume when there is no OSD menu display.
ENGLISH Installation 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION 13 y Only use the specified AAA batteries. y Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. y Insert batteries according to (+) and (-) markings.
ENGLISH 2. Connecting with the antenna Make sure the power is off before installing N2600w. Connect the LCD TV to TV antenna terminal or CATV box by 75-ohm coaxial cable. RF Cable 3. Connect Audio Cable To connect an external amplifier, connect the L/R RCA cable from the TV AUDIO OUT port to the appropriate AUDIO IN port on a compatible amplifier as shown on the right.
ENGLISH 4. Connect AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices Connect Video/Audio cables from compatible devices into the right side of N2600w.
ENGLISH YCbCr Mode: YCbCr Cable (Cable not supplied) Audio in Cable (Cable not supplied) DVD Player or VCR YPbPr Mode: YCbCr Cable (Cable not supplied) Audio in Cable (Cable not supplied) DVD Player or VCR ViewSonic N2600w 16
ENGLISH Connect with a SCART cable SCART1 Mode: Connect the scart socket of the VCR to the SCART1 socket on the LCD TV. Note: The signal type RGB can only be selected for the SCART1 socket and the SCART1 input source can be received. These signals are transmitted, for example, by a pay TV decoder, game machine or photo CD unit, etc and that digital signal can be recorded via SCART1 socket.
There are two possible HDMI cable terminals of your DVD player. Please refer to one of the connection that fits for your requirement. (1) HDMI-DVI cable DVD Player (DVD Palyer should have the HDMI output terminal) HDMI-DVI Cable (Cable not supplied) Note: To receive the sound from DVD, please turn on Sound Menu of OSD for selecting HDMI audio to YCbCr. However, the input source should be in HDMI.
ENGLISH 5. Connect to the PC VGA (15pin D-Sub): Connect the VGA cable from VGA output of PC to the VGA terminal input of N2600w. PC up to 1280 x 1024, or 1360 x 768 is the preferred resolution. PC VGA 15 Pin Cable PC Audio in: Connect the Audio In cable (green) from audio output of your PC to the audio input terminal (green) of N2600w.
ENGLISH HDMI: Connect the HDMI cable from HDMI output of PC to the DVI terminal input of N2600w. PC HDMI Cable (Cable not supplied) Earphone: Connect Earphone from compatible devices into the earphone input at the left side of N2600w.
ENGLISH 6. Connect power cable Connect the power cord to the N2600w then to a properly grounded AC outlet. Turn on the AC Switch on the back of N2600w AC Switch Switch to ON AC wall socket 7. Turn Power ON Press the Power button under the LCD TV, or press the Power On (red) button on the Remote Control. Turn Video source power ON. 8.
ENGLISH Basic Operation To operate the function of your LCD TV, you can use your remote control or those buttons above your LCD TV to set input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Insert the power plug. 2. Connect external equipment properly. 3. Turn on the Main AC Power Switch, located on the rear of the cabinet.
ENGLISH OSD Functions OSD style and operation tips OSD Operation Press the “Menu” button on your remote control or right side of the LCD TV to open the OSD Main Menu. Press Ÿ or ź button to select the sub menu, and pressŻ or Ź to enter the sub menu. Press Ÿ or ź to select the function you would like to adjust, and then press Ż or Ź or OK to adjust it or execute the function. Press the “Menu” button on your remote control or right side of the LCD TV again to close the OSD Main Menu.
ENGLISH Picture menu Item Contrast Brightness Hue Description Adjust the contrast level. Adjust the brightness level. Adjust the tint level. Saturation Adjust color saturation. Sharpness Adjust the picture sharpness. Operation Ź to increase the contrast. Ż to decrease the contrast. Ź to brighten the display. Ż to darken the display. Ź to increase the greenish tone. Ż to increase the reddish color. Ź to increase the brilliant color. Ż to increase the pale color. Ź to sharpen the display.
ENGLISH Sound menu Item Description Operation Audio setup (Main picture or sub picture) ŻŹ to select Main or sub. Bass Adjust the bass. Ź to increase lower-pitched sound. Ż to decrease lower-pitched sound. Treble Adjust the treble. Ź to increase higher-pitched sound. Ż to decrease higher-pitched sound. Balance Adjust the left and right audio balance. Ź to emphasize the right speaker. Ż to emphasize the left speaker.
Item ENGLISH TV menu Description Cur. Channel TV Channel Number Channel Name Current TV Channel Name Operation Ź or Ż: select current Channel Number. Default Current Channel Number OK: modify Name MENU: leave Modify Mode Ÿ or ź:change the char value Ź or Ż:select char Frequency Current TV Channel Frequency Ź or Ż:change the value ADD/Delete ADD: Restores the TV channel previous deleted. Ź or Ż: select ADD or Delete. Delete: Deletes the current TV channel.
ENGLISH Option menu Item Sleep Timer Description Set the timer for the TV to automatically turn off, Available options are OFF, 15 Min, 30 Min, 45 Min, and 60 Min. Operation ŹorŻ to select OFF, 15 Min, 30 Min, 45 Min, and 60 Min. Multi Picture Adjust sub picture functions Ź or Ż enter Multi Picture sub menu.
Item Sub Source H-Position ENGLISH Multi Picture Sub Menu Description Setting Sub picture input source. Ź or Ż to select input source This item is available only if PIP is Selected. Ź to move toward the right. Adjust the horizontal position of the sub picture. This item is available only if PIP is Selected. V-Position Adjust the vertical position of the sub picture. Border color Sub picture Border color setup Swap ViewSonic Operation Change Main source and PIP source.
ENGLISH PC Menu Item Contrast Description Adjust the contrast level. Operation Ź to increase the contrast. Ż to decrease the contrast. Ź to brighten the display. Brightness Adjust the brightness level. H-Position (VGA only) Adjust the horizontal position of the video Ź to move toward the right. V-Position (VGA only) Adjust the vertical position of the video. Ź to move upward. Clock (VGA only) Adjust the delay time between horizontal synchronous signal and video. Ź to increase the delay time.
Item ENGLISH Color Mode Sub Menu Description Operation Color Temp. Some default color temp set is here. Options : Normal, Warm, sRGB, User and Cool Ź to increase the color temp. User-R You can adjust R to change color temp. You can adjust G to change color temp. Ź to increase the color temp. User-G Ź to increase the color temp. User-B You can adjust B to change color temp. ViewSonic N2600w Ź or Ż to select color.
ENGLISH OSD menu Item OSD Language H Position V Position OSD Time Out Transparency Information Memory Recall 31 Description Select the OSD language. Operation Ź or Ż: select the OSD language. Adjust the horizontal position Ź: move toward the right. of the OSD. Ż: move toward the left. Adjust the vertical position of Ź: move upward. the OSD. Adjust OSD display time. Range 0~60 sec. Adjust OSD’s transparency level. Show some Picture information including main/sub picture source and firmware version.
ENGLISH Other Information Specifications LCD ʳ ʳ ʳ Input signal Type Color Filter Glass surface ʳ RGB 26” view able 0.4215(H) x 0.4215(V) mm pixel pitch RGB vertical stripe Anti-Glare RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, fh:30-80 kHz, fv:50-75 Hz TV system Antenna/ PAL/SECAM D-sub x 1, RCA Composite x 1, S-Video x 1 RCA Component x 1 set (YCbCr/YPbPr) HDMI X 1, SCART x 2 Mini-stereo (ӥ3.
ENGLISH Troubleshooting No power y Make sure the LCD TV is properly connected. y Make sure the AC power cord is properly connected. y Make sure the AC power is ON, DC power button is ON (Green LED). y Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Poor or no picture y The TV station may be experiencing problems. Try another channel. y The Cable TV signal may be scrambled or encoded.
y Is the sleep timer set? y The internal temperature of the unit has increased. Remove any objects blocking the vent or clean as necessary. No CATV reception (or no reception above CH13) y Is the AIR/CABLE option set correctly? Please set the AIR/CABLE option to CABLE. y CATV is connected improperly or not connected; please check all the CATV connections. y The cable TV service is interrupted; please contact your cable operator.
ENGLISH Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Contry / Region Web site Telephone Austria www.viewsoniceurope.com/aus 0150 159 6005 Belgium www.viewsoniceurope.com/befl www.viewsoniceurope.com/befr 02 256 6642 Denmark www.viewsoniceurope.com/dk 35 25 65 12 Finland www.viewsoniceurope.com/fi 09 2311 3413 France www.viewsoniceurope.com/fr 03 8717 1616 Germany www.
VIEWSONIC® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.