N2750w LCDTV Display User’s Guide Guide de I’utilisateur Bedienungsanleitung Guía de usuario Användarhandbok käyttöohje Ðóêîâîäñòâî ïîëüçîâàòåëÿ Guida utente
Contents Product Registration.................................................................2 For Your Records.....................................................................2 Important Product Safety Instructions......................................3 Antenna Installation Instructions...............................................4 Cleaning the LCD Display.................................................4 Getting Started Package Contents..............................................................
Copyright © ViewSonic Corporation, 2005. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
IMPORTANT PRODUCT SAFETY INSTRUCTIONS ATTENTION: Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this product follow its operating and keep this user guide for future reference. INSTALLATION 1. Grounding or Polarization Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
ANTENNA INSTALLATION INSTRUCTIONS 1.
Getting Started Congratulations on your purchase of a ViewSonic® LCD TV display. Important! Save the original box and all packing material for future shipping needs.
Front View of the Product 1 E N G L I S H 2 3 4 7 5 8 6 9 1 Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. 2 Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. 3 MENU Turn OSD menu ON/OFF. 4 CH Down Channel down when source is at TV or select a control while in OSD menu. 5 CH Up Channel up when source is at TV or select a control while in OSD menu. 6 ENTER To highlight a control in OSD menu.
Rear View of the Product A B C D E F G HIJ K L M N A TV signal input Connect to the antenna or cable service. B AV Video input Connect the external video device such as VCR, DVD and video game into this jack. C S-Video input Connect the external video device such as VCR, DVD and video game into this jack. D SCART input Connect the external video device such as VCR, DVD and video game into this jack. E Audio output Connect this port to your external speaker.
Remote Control E N G L I S H ViewSonic N2750w 8
Remote control button function as follow A POWER button Power ON/OFF B INFO button Source and channel display C SLEEP button TV Sleep time setup D SOUND button Switch sound sap type in TV mode E MUTE button Mute ON/OFF F EXIT button OSD exit G Zoom button Adjust focal distance of zoom and pan H PIP INPUT button Select input source of sub-picture in PIP, PBP, Multi Window condition I J PIP/SPLIT button Select PIP, PBP, Multi Window, or Full Screen condition WIDE button Select scre
Teletext function control button TEXT/ MIX/ PICTURE button In TV Mode: Press the TEXT/ MIX/ PICTURE button to enter the Teletext mode. In TELETEXT Mode: Press the button again to superimpose a Teletext broadcast onto the screen of current TV program (mixed Mode). In MIXED Mode: Press the button again to return to the normal TV screen (current program). Index button E N G L I S H Press the Index button to return to index page. When you press this button in teletext mode, a CURSOR appears.
Hold button Press this button to remove the information from the display and stop the automatic page change will occur if a teletext page consists of 2 or more sub pages. Continue press this button again. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed, the stop symbol is displayed at the left-top corner of the screen, and the automatic changing is inhibited. Store button Store current pages in List mode.
Installation 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION E N G L I S H Only use the specified AAA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. Insert batteries according to (+) and (-) markings.
3. Connect Audio Cable Connect Video/Audio cables from compatible devices into the back panel of N2750w. OPTIONAL: To connect an external amplifier, connect the L/R RCA cable from the TV AUDIO OUT port to the appropriate AUDIO IN port on a compatible amplifier as shown on the right. Stereo system Audio Cable (Cable not supplied) E N G L I S H 4. Connect AV, S-Video, YPbPr to Video Devices Connect Video/Audio cables from compatible devices into the back panel of N2750w.
S-Video model: S-Video Cable (Cable not supplied) VCR Audio in Cable (Cable not supplied) YPbPr model: E N G L I S H YPbPr Cable (Cable not supplied) DVD Palyer or VCR Audio in Cable (Cable not supplied) ViewSonic N2750w 14
5. Connect to the PC VGA (15pin D-Sub): Connect the VGA cable from VGA output of PC to the VGA terminal input of N2750w. PC up to 1280 x 1024, 1024 x 768 is the preferred resolution. PC VGA 15 Pin Cable (Cable not supplied) E N G L I S H PC Audio in: Connect the Audio In cable (green) from audio output of your PC to the audio input terminal (green) of N2750w.
Earphone: Connect Earphone from compatible devices into the back panel of N2750w. Earphone (Earphone not supplied) E N G L I S H 6. Connect power cable Connect the power cord to the N2750w then to a properly grounded AC outlet.
7. Turn Power ON Press the Power button on top of the LCD display. Or press the Power On (red) button on the Remote Control. Turn Video source power ON. 8. Select input source for your LCDTV display, via either OSD menu or Remote control The Enter key of N2750w is the shortcut key for selection of input source to display. TV key of remote control is shortcut for TV selection.
OSD Functions Basic operation To adjust the function of your LCD TV, you may use your remote control or those buttons onto your LCD TV to set input sources, such as OSD sources, volume adjusting, and etc. Powering the LCD TV Before using the LCD TV: 1. Insert the power plug. 2. Connect external equipment properly. 3. Turn on the Main Power Switch.
Info Display the current information, such as input source, resolution, vertical frequency, resolution type, channel, and sound mode. Press INFO, and the current state will be displayed on the screen. Freeze To freeze the main picture. When the picture stops, The sound still continues. Input Source Select There are Composite, S-Video, RGB, Component, TV, and SCART sources provided.
Advanced Operation -OSD Menu/ Remote Control VIDEO—Adjust the Video BY OSD MENU The video menu is active in all input sources. Press MENU. Press to select VIDEO. Press ENTER. Press to select the desired item you want to adjust. Use to adjust it. Press EXIT to close the recent page. Press MENU again to leave OSD E N G L I S H Menu. Contrast: To adjust the white level of the video. Brightness: To adjust the black level of the video. Colour: To adjust the colour saturation.
GRAPHICS—Adjust the Graphics BY OSD MENU The graphics menu is only active in “RGB.” However, in “Component” mode, phase function will be available. When in PIP/PBP/Multi Window screen, graphics menu only works on main screen. In sub screen, it is unable. Press MENU. Press to select Graphics. Press ENTER. Press to select the desired item you want to adjust. Use to adjust it. Press EXIT to close the recent page. Press MENU again to leave OSD Menu.
AUDIO—Adjust the Audio BY OSD MENU The audio menu is active in all input sources. Press MENU. Press to select AUDIO. Press ENTER. Press to select the desired item you want to adjust. Use to adjust it. Press EXIT to close the recent page. Press MENU again to leave OSD Menu. E N G L I S H Treble: To adjust the treble. Bass: To adjust the bass. Balance: To adjust the left and right audio balance. BY REMOTE CONTROL SOUND: Press it repeatedly to select the type of sound of full screen or main screen.
MUTE: To mute the sound. To disable Mute, press MUTE again, or press sound. directly to adjust the DISPLAY—Adjust the Display BY OSD MENU The display menu is active in all input sources. Press MENU. Press to select DISPLAY. Press ENTER. Press to select the desired item you want to adjust. Use to adjust it. Press EXIT to close the recent page. Press MENU again to leave OSD Menu. Aspect Ratio: To select the screen width to 16:9, 4:3 or Move Expand viewing mode. However, it only works on full screen.
SETTING—To setup the Setting BY OSD MENU While the input source is TV, all the functions of setting menu are active. However, in other input sources, the functions of country, auto scan, fine tune, and channel edit are unable—only main source, language, and memory recall are active. Press MENU. Press to select DISPLAY. Press ENTER. Press to select the desired item you want to adjust. Use to adjust it. Press EXIT to close the E N G L I S H recent page. Press MENU again to leave OSD Menu.
Channel Edit: To program your favorite channels and edit the program name. Definition: 1. Channel: Indicate the original channel number. 2. Program Name: Indicate the name you edit for the appointed channel. Favorite: 1. There are 0~99 favorite channels provided to set up. The ordinal numbers of favorite channel decide the channel display sequence while using with your remote control. 2. How to program your favorite channels? 1.
PIP—Adjust the PIP BY OSD MENU The PIP menu is active in all input sources. It allows you watch two screens or multi-screens from different sources at the same time. Press MENU. Press to select DISPLAY. Press ENTER. Press to select the desired item you want to adjust. Use to adjust it. Press EXIT to close the recent page. E N G L I S H Press MENU again to leave OSD Menu. PIP Source: To select the input source for the sub-screen as below.
BY REMOTE CONTROL Press PIP V.SWAP: main and sub picture of PIP/PBP/Multi Window will be exchanged to each other, both sound and picture (A: main picture; B: sub picture). Press PIP SOUND: select to sound from sub picture or main picture. PIP PBP Multi-Window E N G L I S H Zoom Adjust To adjust the focal distance of zoom and pan. (This function is only active in Full screen. Adjust Zoom: 1. Press ZOOM button. 2. Press to adjust zoom factor. 3. Press ZOOM again to exit. Adjust PAN: 1.
OPTION—Adjust the Option BY OSD MENU The OPTION menu is active in all input sources. Press MENU. Press to select VIDEO. Press ENTER. Press to select the desired item you want to adjust. Use to adjust it. Press EXIT to close the recent page. Press MENU again to leave OSD Menu. E N G L I S H OSD Transparency: To adjust the background transparency of OSD Menu. OSD Timeout: The OSD will automatically turn off if there is no adjustment made for a certain time of period.
Other Information Specifications LCD Type 27" TFT Active Matrix 0.1555(H) x 0.4665(V) mm pixel pitch RGB vertical stripe Anti-Glare Colour Filter Glass surface Input signal RGB Audio RGB analog (0.7/1.
Troubleshooting No power Make sure power button (or switch) is ON. Make sure A/C power cord is securely connected to the LCD TV. Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image Make sure the video cable supplied with the LCD TV is tightly secured to the video output port on the back of the Video source.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Contry/ Region Web site T = Telephone F = FAX United Kingdom T: 00 44 (0) 800 833 648 viewsonic@brands.co.uk F: 00 44 (0) 1475 657808 www.viewsonic.com/ support Email France T: 00 33 (0) 1 414 74930 F: 00 33 (0) 1 47 99 75 30 German T: 00 49 (0) 800 1717 430 viewsoniceurope@rtsservices.de Nordics www.infocare.
Limited Warranty VIEWSONIC LCD DISPLAY E N G L I S H What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Appendix Safety Guidelines For European Countries In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors. AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY.
